Loading ...
Loading ...
Loading ...
ENGLISH
10
18 POWER
• Supplies the AC mains power to the M33.
• When the POWER switch is set to ON position, the M33 goes to
standby mode as shown by the amber status condition of STATUS
INDICATOR (NAD logo) indicator.
• Press o (Standby) button or HTRM 2’s remote control’s [ON] button
to switch ON the M33 from standby mode.
• If you do not intend to use the M33 for long periods of time (such
as when on vacation), switch o the POWER switch.
• With POWER switched o, neither the front panel Standby button
nor HTRM 2 remote control’s [ON] button can activate the M33.
19 FUSE HOLDER
• Only qualied NAD service technicians can have access to this fuse
holder. Opening this fuse holder may cause damage thus voiding
the warranty of your M33.
20 GROUND TERMINAL
• Ensure that the M33 is plugged-in to a grounded AC wall outlet.
• If necessary, use this ground terminal to connect to ground a
phono or turntable source for PHONO input.
• If a separate earth ground is necessary, use this terminal to ground
your M33. The M33 can be connected to ground by connecting a
ground lead wire or similar to this terminal. After insertion, tighten
the terminal to secure the lead.
21 AC MAINS INPUT
• The M33 comes supplied with two separate mains power cords.
Select the mains power cord appropriate for your region.
• Before connecting the power cord’s plug to the mains power outlet,
ensure that the other end of the power cord is rmly connected to
M33’s AC Mains input socket.
• Always unplug the power cord from the mains power outlet before
disconnecting the other end of the power cord from M33’s AC
Mains input socket.
IDENTIFICATION OF CONTROLS
REAR PANEL
Loading ...
Loading ...
Loading ...