Loading ...
Loading ...
Loading ...
Setting broil
Use the broil feature to cook meats that require direct
exposure to flame heat for optimum browning. Use the
broiler drawer and rack along with the broil pan and
insert when broiling. The broiler drawer offers 3 different
broil rack positions.
3 rear locating
hole positions
tilt up front of rack
remove and adjust
• DO NOT use oven or broiler drawer for storage.
Items placed in oven or broiler drawer will catch fire.
• Should an oven fire occur, close the door and drawer
and turn the oven OFF. If the fire continues, use a fire
extinguisher. DO NOT put water or flour on the fire.
Flour may be explosive.
• Always use oven mitts when using the oven or
broiler drawer. When cooking, the oven, cooktop,
broiler drawer and racks will become very hot which
can cause burns.
• The broil pan and insert allows grease to drain and be
kept away from high heat of the broiler. DO NOT use
broil pan without insert. DO NOT cover insert with
Broil pan
Broil pan insert
7
always pick up
broil pan and insert
from sides
Broiler drawer rack
Fig. 1
• For optimum browning, close broiler drawer and
preheat broiler 5 minutes before adding food.
For medium doneness, position the broiler rack close
to the oven burner (upper or middle positions). For
well-done foods such as chicken, lobster tails or thick
cuts of meat, position rack further away from oven
burner (lower position).
Fig. 2
Fig. 3
To set broil
1. Slide broiler drawer out until drawer stops.
2. Remove broiler pan and insert (See Fig. 1).
3. If needed, reposition broiler rack in broiler drawer
while the range is still cool. Be sure to read broiler
rack position recommendations (See Notes).
4. If needed, change broiler rack position by tilting front
of rack up & pulling rack completely out from locating
holes in rear of broiler drawer (See Fig. 2). Reposition
back of rack in one of 3 locating holes and allow front
of rack to slide down into the corresponding slots in
front of broiler drawer (Fig. 3). Be sure rack is level
before broiling.
5. Place insert on broiler pan and place prepared food
on insert. Place broiler pan and insert with food into
broiler on drawer rack as shown (See Fig. 1). Slide
broiler drawer completely into range.
6. Press broil." ----" will appear in display.
7. Press and hold the A or V until the desired broil
setting level appears in the display. Press the A for
HI (high) broil or the V for LO (low) broil. Most
foods can be broiled at the HI broil setting. Select the
LO broil setting to avoid excess browning or drying of
foods that should be broiled to the well-done stage.
8. Broil on one side until food is browned; turn and broil
on other side.
9. When finished broiling, press clear off.
Loading ...
Loading ...
Loading ...