Loading ...
Loading ...
Loading ...
4
Step 3: Hang TV on to the Wall Plate
A. Carefully lift the TV to hook the arms over the
top lip of the wall plate. Allow the lower portion of the
arms to swivel in under the bottom lip of the wall plate.
Do not release the TV until it is completely connected to the
wall plate (Figure 5).
ADJUSTMENTS:
Adjust Horizontal Level and Tilt
Forward Tilt Adjustment (SB-WM-T-L-BL)
A. Using the included long Allen key, loosen the tilt adjustment
locks on the sides of the arms enough to allow movement.
B. Set the tilt to the desired angle, then re-tighten the locks. If
the locks cannot be tightened enough, remove the TV from
the wall for better access.
Horizontal Adjustment
A. If display is not horizontally level when mounted, Tilt
Adjustment Screws are included at the top of each arm
for micro-adjustments (Figure 7). Use provided Allen Key to
raise or lower the screw, which will in turn raise or lower the
mount.
Note: Due to display weight, it may be easier to lift panel
slightly when adjusting the screw. Caution should be taken
to avoid any slips or drops to avoid damage and/or injuries.
Locking
A. To lock the arms to the wall bracket, twist the locking tabs
until the edge catches behind the bracket. The Allen Key
can be used as a tool to help with this step. Padlock is
optional (not included).
±5° Horizontal
Adjustment
Tilt Adjustment
Screw
Locking
Tab
Tilt Adjustment Lock
Figure 5
Figure 6
Figure 7
170130-1350 © 2017 SunBrite
Lifetime Limited Warranty
SunbriteTV™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all compo-
nents found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply
to products which have been abused, modied or disassembled. Products to be repaired under this warranty must be
returned to SunbriteTV or a designated service center with prior notication and an assigned return authorization (RA)
number.
Technical Support 866.838.5052