Loading ...
Loading ...
Loading ...
4.1 HEAD LAMP SAFETY INFORMATION
– Do not point (shine) the light into any persons or animals eyes.
– Do not use near children.
– Store out of the reach of children.
– Do not put this unit into a fire or use near any flammable object.
– Do not use in explosive atmospheres or environments.
– Do not use excessive force as it can permanently damage the head lamp.
- Only use the USB charging cable in a standard environment.
- Do not use the USB charging cable to charge any other product and only use the
supplied USB charging cable to charger this head lamp.
4.2 CONNECTION TO THE POWER SUPPLY (CHARGER)
This head lamp is used in conjunction with a UK standard 3 pin charger. It is designed
for connection to a domestic power supply rated at 230V AC. If an extension lead is
required, use an approved and compatible lead rated for this appliance. Follow all the
instructions supplied with the extension lead. This product requires no earth
connection as supplementary insulation is applied to the basic insulation to protect
against electric shock in the event of failure of the basic insulation.
4. HEALTH AND SAFETY INFORMATION
3. INTRODUCTION
3.3 HANDLING AND STORAGE
Store in a dry location out of the reach of children.
5. IDENTIFICATION
6. UNPACKING AND CHECKING
6.1 WHAT´S IN THE BLISTER?
As well as the head lamp; there are parts not fitted or attached to it.
(10)
(10) USB charging cable
As the charge diminishes, the light intensity will begin to reduce. The battery should be
recharged before it is drained completely.
– Before charging, ensure head lamp is OFF.
– Insert the USB cable (10) into a 230V USB power adaptor
and the micro USB
connect into the head lamp (8) and turn on the charger.
– The head lamp’s LED indicator (4) light will illuminate RED.
– Charge the unit for 3 hours, when light changes to GREEN the lamp is fully charged,
then disconnect from the power supply.
Note: Do not completely discharge the battery before recharging.
(1)
These instructions accompanying the product are the original instructions. This document
is part of the product, keep it for the life of the product passing it on to any subsequent
holder of the product. Read all these instructions before assembling, operating or
maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the
product has been designed, and contains all the necessary information to ensure its
correct and safe use. By following all the general safety instructions contained in this
manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate
the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this
manual, the Draper Tools policy of continuous improvement determines the right to make
modifications without prior warning.
(1) Angle adjustment.
(2) Elasticated strap.
(3) 3 Watt COB LED.
(4) Charging indicator LED.
(5) 3 Stage ON/OFF switch.
(6) Action sensor switch.
(7) Sensor.
(8) Micro USB charging port.
(9) Action sensors.
(5) (6)
(7)
(4)
(2)
(3)
(9)
(8)
(1)
4
5.1 TECHNICAL IDENTIFICATION
7. OPERATION AND USE
FIG.1
The table below highlights the
approximate hours of continuous
usage available when fully
charged:
(8)
High: 2 hours
Low: 6 hours
7.1 CHARGING – FIG. 1
Note: Before using the head lamp, charge
the battery fully.
(4)
Loading ...
Loading ...