Loading ...
Loading ...
Loading ...
14
properly.
• The gaskets are dirty.
• The racks or bins are out of position.
• Clean the drawer gaskets.
• Check the racks and bins and refit
correctly.
Display “E0”,
“E1”. “E2”,
“E3”, “E4”,
“E5” or “E7”.
• “E0” indicates a communication error
for 3 zone models.
• “E1” or “E2” indicates that the air
temperature sensor has failed.
• “E3” or “E4”indicates that the defrost
sensor in the evaporator has failed.
• “E5” indicates defrost heater failure.
• “E7” indicates door switch failure.
• Call for service.
The alarm
sounds and
the
temperature
display
flashes.
Has a drawer been open for longer than
60 seconds? If not, then the temperature
has risen higher or fallen lower than the
temperature that has been set. This
could be due to:
• The appliance drawers being opened
too often.
• The ventilation opening being covered
or too dusty.
• A lengthy interruption in the power
supply.
• A large amount of food has been
added to the unit.
If yes, close the drawer.
• Do not open drawers more often
than necessary.
• Clear the obstructions and clean off
the dust.
• Leave the appliance to work for a
while until the set temperature has
been reached.
The icon “--”
is lit and
flashing in the
temperature
display.
• The display temperature is out of
range.
• Only temperatures within the range
0~99°F/-9~37°C for SPR626OS2D
and the range -49~99°F/-45~37°C
for SCFF51OS2D can be displayed.
If the temperature is not within this
range, the icon “--” will be displayed
instead. This is normal.
If you've checked the table above and find that you still need help with your appliance, call our
Customer Service facility at 800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to
answer your questions.
Loading ...
Loading ...