Loading ...
Loading ...
Loading ...
Washing Procedures
'continued)
Do not loadhigherthan top of agitator
vanes.
Built-In Fabric Softener Dispenser
(some models)
\
\
Built-In Fabric Softener Dispenser
(some models)
Safety Lid Lock
6. Add laundry load to washer.
Dry load level should not be higher than the top of the agitator vanes.
Do not overload the washer.
Do not put items on top of agitator or wrap them around it. Load items
evenly.
Combine large and small items in a load. Load large items first. Large
items should not be more than half the total wash load.
When washing asingle heavy item, add 1 or 2 towels to balance the load.
7. Ifdesired, addliquidfabricsoftenertofabricsoftenerdispenser(available
on some models).
For models with a built-in dispenser (see picture to the left):
1. Add liquid softener tothe dispenser,following fabric softener label directions.
2. Add water to bring liquid level to fill line on dispenser cap.
3. Removethe dispenser from the agitator after each use. Rinseboth cap and
cup with warm water. Replace dispenser in the agitator.
NOTE:Toseparate capfrom cup, put thumb into dispenserand push against side
of cup (seepicture to the left). After cleaning, push capand cup firmly together.
Replacedispenser bylining up the ribsand grooves and snapping it into position.
If a build-up of fabric softener occurs, cleanwith hot water. DO NOTREMOVE
SERVICECAPFOUND INSIDE THEAGITA TOR POST.
Formodels withouta fabric softener dispenser, follow fabric softener label
directions. Add diluted fabric softener to the final rinse. Do notpour fabric
softener directly on the wash load.
8. Select cycle and settings according to type, size and soil level of each
load.
SeeOperating Instructions for your specific model controls.
. Start the washer.
Close the washer lid and pull out the cycle selector knob. The washer will not
fill with water, agitate or spin when the lid isopen, and will only start to do so
if the lid isclosed.
To stop the washer, push in the cycle selector knob.
Do not stop and restartwasher during aspin when using the fabric softener
dispenser.
To change a cycle, push in the cycle selector knob. Turn it clockwise to
the desired setting. Pull out the knob to restart the washer.
10. Remove items when the cyde is completed.
Foryour safety, the lid locks when the tub is spinning. It will remain locked for
about 2-3 minutes after the tub stops spinning.
To open the lid during aspin, push inthe cycle selector knob and wait about
2-3 minutes for the lid lock to release. Do not force open the locked lid.
Placewashed items in automatic dryer, line dry, or dry flat asdirected byfabric
care label. Excesswrinkling, color transfer or odors may develop in items left in
the washer after the cycle has ended.
_To avoid serious personal injury, do not operate washer if safety lid
lock is missing or damaged.
Loading ...
Loading ...
Loading ...