Loading ...
Loading ...
Loading ...
©2017 Hestan Commercial Corporation
11
EN
CART & GRILL ASSEMBLY
(continued)
10. Remove the screws securing the control panel on the front of the grill. Carefully tilt down the control
panel being careful not to damage the wires to the switch and LED light bar. Pull off the connectors
to the switch and the LED light bar at this time. Remove the control panel from the grill and set aside.
11. Reach inside the right front area of the cart wall and install 2 flat washers and hex bolts as shown here
using a 7/16” wrench or socket wrench. Do not tighten yet. Repeat this on the opposite side of the cart.
Loading ...
Loading ...
Loading ...