Craftsman 580752011 power washer

User Manual - Page 9

For 580752011.

PDF File Manual, 52 pages, Download pdf file

Loading ...
Loading ...
Loading ...
10. Move throttle lever to "Fast" position, shown here
as a rabbit.
Fast
Stop
J
Throttle
Lever in
STOP
position
NOTE: For a warm engine, be sure the throttle lever is
in the "Fast" position.
To start the engine for the vecy first time:
11. Make sure throttle lever is in "Fast" position
(indicated on the engine as a rabbit).
12. Push primer bulb firmly 5 times, waiting 2 seconds
between each push.
To start engine thereafter:
11. Make sure throttle lever is in "Fast" position
(indicated on the engine as a rabbit).
12. Press primer bulb firmly 3 times, waiting
2 seconds between each push. For a warm
engine, DO NOT press primer bulb.
13. When starting engine, position yourself as
recommended below. Grasp handle and pull recoil
starter lightly until you feel some resistance, then
pull briskly.
I
i
\\ I i
14. Return starter grip handle slowly. DO NOT let rope
"snap back" against starter.
WARNING
When starting engine, pull cord slowly until resistance is
felt and then pul! rapidly to avoid kickback.
If engine starts and fails to continue to run or if increased
resistance is felt during starting pull attempts, squeeze
trigger on spray gun.
NOTE: Always keep the throttle lever in the "Fast"
)osition when operating the pressure washer.
WARNING
DO NOT touch hot surfaces and avoid hot exhaust gases.
Allow equipment to cool before touching.
The pressure washer must be at least 5 feet from
structures having combustible walls and/or other
combustible materials.
Keep at least 3 feet of clearance on all sides of pressure
washer for adequate cooling, maintenance and servicing.
Reflective exhaust heat may damage fuel tank causing fire.
Code of Federal Regulation (CFR) Title 36 Parks,
Forests, and Public Property require equipment powered
by an internal combustion engine to have a spark
arrester, maintained in effective working order, complying
to USDA Forest service standard 5100-1C or later
revision. In the State of California a spark attester is
required under section 4442 of the California Public
resources code. Other states may have similar laws.
CAUTION
DO NOT move pressure washer while running.
Always use handle to lift equipment.
NEVER pull on hoses to move equipment.
Loading ...
Loading ...
Loading ...