Loading ...
Loading ...
Loading ...
further detail of warranty coverage and warranty repair information, visit www.craftsman.com or call 1-888-331-
4569. This warranty does not apply to accessories or damage caused where repairs have been made or
attempted by others.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHERS, INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND EXCLUDES ALL INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so these limitations may not apply to you. This warranty gives you specific
legal rights and you may have other rights which vary in certain states or provinces.
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your CRAFTSMAN Power Tool or Nailer for any
reason, you can return it within 90 days from the date of purchase with a receipt for a full refund – no questions
asked.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin
America, see country-specific warranty information contained in the packaging, call the local company or see
website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-888-
331-4569 for a free replacement
Troubleshooting
Trigger valve housing leak
s air.
O-ring cut or cracked. Replace O-ring.
Trigger valve stem leaks ai
r.
O-ring/seals cut or cracked.
Replace the trigger valve asse
mbly.
Frame/nose leaks air.
Loose nose screws. Tighten and recheck.
The O-ring or gasket is cut or cracked. Replace the O-ring or gasket.
The bumper is cracked/worn. Replace bumper.
The frame/cap leaks air.
Damaged gasket or seal. Replace the gasket or seal.
Cracked/worn head valve bumper. Replace bumper.
Loose cap screws. Tighten and recheck.
Failure to cycle.
Air supply restriction. Check air supply equipment.
Tool dry, lack of lubrication.
Use Air Tool Lubricant.
Worn head valve O-rings. Replace O-rings.
Broken cylinder cap spring.
Replace the cylinder cap spring
.
The head valve is stuck in the cap. Disassemble/Check/Lubricate.
The tool is dry and lacks lubrication. Use Air Tool Lubricant.
Loading ...
Loading ...
Loading ...