Loading ...
Loading ...
Loading ...
_,,_:_/¸_.®,. _' _ _,_
_Speakerplacement __@_
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
C_ution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 -Q MIN". In this case, you can also use 4-ohm speakers as the front speakers.
For details, see "Setting the speaker impedance" (p.14).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 G.
Front (L) _ •
Produce front right/left channel sounds (stereo sounds).
Front (R) _ •
Center _ Produces center channel sounds (such as movie dialogue and vocals). •
Surround (L) _ •
Produce surround right/left channel sounds.
Surround (R) _ •
Surround back (L)* _ •
Produce surround back left/right channel sounds.
Surround back (R)* _ •
Surround back* _ Produces sounds mixed from surround back left/right channel sounds.
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
Subwoofer _ This channel is counted as "0.1". •
You can connect 2 subwoofers (with built-in amplifier) to the unit.*
* RX-V575 only
• •
• •
• •
• •
• RX-V575 supports 2- to 7.1-channel system, and RX-V475 supports 2- to 5.1-channel speaker system.
• (RX-V575 only)
Two subwoofers connected to the unit output the same sounds.
PREPARATIONS • Placing speakers En 12
Loading ...
Loading ...
Loading ...