Loading ...
Loading ...
Loading ...
Through-the-WallInstallationInstructions-OptionaL
Thecasemay beinstalledthroughthewall in bethexistingand new construction.
Readcompletely, then follow step-by-step.
IMPORTANT
Through-the-wallinstallationis notappropriate
if anyof theside louversin thecase will be
obstructedbythewall.
All side louversin thecasemustproject on the
outdoorside of thewall.
Theroomside ofthe casemustproject intothe
roomat least 13/g"fromthefinished wall.
Thecasemustbe installedlevel fromside-to-side
and with a slighttilt fromfronttorear.Usea level;
abouta 1/2bubblewill be thecorrectcaseslantto
theoutside.
[]Remove the air conditioner fl'om the case.
For specific instruction, refer to the Window
Installation Instructions.
[]Make certain a wall receptacle is available
close to the hole location or make
arrangements to install a receptacle.
[]Place the case in the wall opening and
secure with 12 1" long #10 wood screws.
NOTE:Drill pilot holes, if necessary,for proper
installation. If the frame is oversized, useshims
toprevent case distortion.
Finish the Wall Opening
Caulk all four sides on the outdoor side of the case to prevent moisture from getting through to the
interior wall. Use of flashing (drip rail) will further prevent water fl'om dripping inside the wall and
down the outside of the building.
x
ill]-P,aster,ine
Lintelangle(ifrequired)_{ l/
Tnmmoldln ffd ir
Cau,k °g - 111 -- " "g(" as" ed)
OUTSIDE
Air louvers
(must project on
the outdoor side
of the wall)
Wood Filler and Caulkir
(above and below the flashing)
Flashing (Drip rail)
INSIDE
--I Bottom rail
4,5 cm (13/4") min.
15
Loading ...
Loading ...
Loading ...