Loading ...
Loading ...
Loading ...
4 Installation & Operation Manual Copyright © Puretec Pty Ltd 2018
Installation Guide
8. Fit tubing into connectors (for quick-connect ttings see Fig 2). Allow slack in the
tubing.
9. Restore the water supply and check for leaks.
10. Run the system for at least 5 minutes to remove carbon nes. Water may appear
milky, but this is normal and is only tiny air bubbles that will clear aer a short period.
Cartridge Installation/Changeout
1. Place container under lter in case of drips.
2. Isolate water supply and release water pressure by operating faucet lever.
3. Disconnect tubing from the cartridge. Discard old cartridge.
4. Remove packaging from the new cartridge. Connect tubing to either end of the
cartridge. Ensure ow arrow on cartridge is in direction of waterow.
Replacement cartridge code for X3 model: Puretec IL149Q
Replacement cartridge code for X4 model: Puretec IL150Q
5. When replacing cartridge, ensure you reset the LED reminder light by removing/
replacing the battery from the rubber seat. Please refer to page 6 for a detailed
diagram.
6. Restore water supply.
7. Check for leaks, rectify any, before leaving the unit.
Aer installing cartridges ush unit for 5 - 10 minutes.
Use Guidelines
• Do not allow exposure to temperatures below 0°C. Protect from freezing.
• Maximum operating temperature 38°C.
• Maximum ow rate 1.9 Lpm.
• This product must be installed in accordance with local plumbing regulations by a
licensed plumber on the cold water line - mains only.
• Replacement Cartridges: See Cartridge Changeout section.
• This system requires regular replacement of the lter cartridge to maintain proper
operation. Varying chlorine, sediment, or organic substance levels may aect
replacement frequency.
• Be sure to change the lter cartridge at least every 9,500 litres or 6 months which
ever occurs rst; or whenever you detect a change in taste, odour, or decrease in ow.
Caution: Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or aer the system.
Loading ...
Loading ...
Loading ...