Loading ...
Loading ...
Loading ...
ASSEMBLY
Assembly requires two persons. Place all parts of the recumbent cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench _4.
Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers to the
quantity needed for assembly. Note: Some smaml parts may have been pre-attached for sMpp{ng. If a part is
not in the parts bag, check to see if it has been pre-assembled.
M6 Nylon
Locknut (71)---4
M8 Flat
Washer (80)---4
'\_ ) i" ' x ,_
M6 Split M6 Flat Console
Washer (57)---4 VVasher(67)--4 Washer (45)---4
L)
M4 x 16mm
Screw (84)-1
f_
ii/
_J
MI0 Split
Washer (48)---4
i
M6 x 12.7mm M6 x 16mm
Button Screw (62)---4 Button Screw (68)-8
',,', '',l.',jt' ' ' ,',
M6 x 35mm Console MI 0 x 25mm
Bolt (70)---4 Screw (83)-4 Screw (81)-4
1. Attach the Stabilizer (8) to the Frame (1) with four
MI0 x 25mm Screws (81) and four M10 Split
Washers (48).
81
4
Loading ...
Loading ...
Loading ...