Loading ...
Loading ...
Loading ...
This unit is not designed to operate in enclosed spaces. When placing your unit,
make sure you allow at least 4” of clearance on all sides.
Use two or more people to move and install refrigerator. Failure to do so can result in
back or other injury.
To ensure proper ventilation for your refrigerator, the front of the unit must be completely
unobstructed. Choose a well-ventilated area with temperatures above 60°F (16°C) and
below 90°F (32°C). This unit must be installed in an area protected from the elements,
such as wind, rain, water spray or drips, and away from direct sunlight.
The refrigerator should not be located next to ovens, grills or other sources of high heat.
The refrigerator must be installed with its electrical connection in accordance with state
and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded
in accordance with the National Electrical Code and local codes and ordinances is
required.
Do not kink, pinch or coil the power supply cord of the refrigerator. Keep cord away from
the compressor at the back of the appliance; heat from the compressor could damage
the insulation of the cord and cause electrical leakage.
The fuse (or circuit breaker) size should be 15 amperes.
It is important for the refrigerator to be leveled in order to work properly. You may need to
make several adjustments to level it.
In order to ensure normal operation of the refrigerator, after moving it a considerable
distance, you must wait for ½ to 1 hour before turning the unit on.
After an electrical failure, wait at least 5 minutes before turning on the refrigerator
again or the compressor may be damaged.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
IMPORTANT: Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
IMPORTANT: Do not damage the refrigerant circuit.
IMPORTANT: Do not use electrical appliances inside the food storage compartment of
the appliance, unless they are of the type recommended by the manufacturer.
Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners
may damage or discolor the interior.
Do not use this apparatus for other than its intended purpose.
SAVE THESE INSTRUCTIONS
3
Loading ...
Loading ...
Loading ...