Loading ...
• If the dishwasher is installed in a cabinet
open the door slightly to install the panel.
• Place the new panel over the top of the es-
cutcheon. The top corners of the new panel
should overlap and cover the escutcheon
corner cutouts (Figure 4).
• Rotate the bottom of the panel back against
the door assembly (Figure 4). Check to be
sure the sides of the replacement panel fit
around the hinge arms.
• Check panel fit at the escutcheon (Figure 6).
Make sure the escutcheon ribs on the sides fit
inside the panel. Adjust the panel up or down
and left to right to center the panel with the
escutcheon.
• Loosely install the 2 original screws at the
bottom of the panel (Figure 6). Check again
to be sure the escutcheon is aligned with
the panel opening.
• Hold the replacement panel in position while
opening the door and reinstalling the original
10 panel screws (Figure 5). Install the 2 upper
(top) corner screws, then install remaining 8
screws.
• Close the door.
• Tighten the 2 bottom screws (Figure 6).
Pub. No. 31-303565 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. DWG. NO. 206C1559P105
(N.D. 923-19) 3/04
Figure 4
Figure 5
Figure 6
2 INSTALL NEW PANEL
Escutcheon
Ribs
Escutcheon
Opening
Escutcheon
Check Fit
Around
Escutcheon
Bottom
Phillips Screws
Loading ...
Loading ...