Loading ...
Loading ...
11
device which will switch o it in case
of accidental overheating. To reset,
please contact Customer Experience,
see enclosed guarantee.
SAVE THESE
INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE
ONLY
DESCRIPTION
A Display
B On-o button
C Power setting button
D + Adjustment button
E - Adjustment button
F Timer button
G Brightness button
H Eco button
I Cord holder
L Wheel
USE
"Easy wheel" system
Turn the radiator upside down on a rug or a soft surface in
order to prevent damaging the paint nish.
Fully unfold the wheels by turning them outwards (Fig. 1).
Turn the radiator back to its upright position.
Location
The heater must not be placed immediately below a power
outlet. Do not use this radiator in rooms having a surface
area of less than 43 square feet (4 sq.m.).
Power connection
The radiator must be connected to a properly polarized A/C
110/120 V household outlet in perfect working condition.
The appliance will be set in the o condition.
The display will show the symbol. Keep loose clothing
or bedding, furniture and ammable material away from
the power outlet where the heater is plugged in.
After an interruption of the power supply (power failure or
appliance unplugged) the unit goes always to o.
When the unit is switched on by pressing the on-o button,
the operating conditions will be same ones previously set.
Heating function
To turn the appliance on, press the
(B) button.
Press button (C) to set the required power level:
MIN ( ); MED ( ); MAX ( ).
To select the desired temperature, press button + or - (E
or D). By pushing the + or - button once, the temperature
(shown on the display) will increase or decrease by
34°F
(1°C)
. Holding the + or - button depressed the value will
increase o decrease rapidly.
The appliance allows to set a temperature of 5°C (41°F) and
a range from 10°C to 28°C (50°F to 82°F).
Anti-freeze function
Setting the temperature to 5°C (41°F), the appliance
will activate the Antifreeze function. The display will
show the symbol, in this way the appliance will turn
on automatically, at the max power, only if the room
temperature falls below 5°C (41°F), to prevent freezing
conditions. If you wish to go back to the Heating function,
press the "+" button once.
Please note: in this function the power level settings
are not able to be adjusted, unit will run at MAX.
Eco function
When this function is active the appliance automatically
sets the most appropriate power level to guarantee
optimum comfort while reducing energy consumption.
Your product is equipped with a polarized alternating
current line plug (a plug having one prong wider than the
others). This plug will t into the power outlet only one
way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the plug
should still fail to t, contact your electrician to replace
your obsolete outlet. Do not attempt to modify the plug to
bypass this safety feature.
Fig. 1
Loading ...
Loading ...