Loading ...
Loading ...
Loading ...
5
Installation
Mounting to a stud is recommended. However, if fitted to other wall linings (plasterboard, concrete etc) suitable fixings
will be required. Before drilling any holes check that the wall and ceiling are clear of any electrical cables, pipes etc.
1. Pre drill pilot holes in the positions given. Fix the fixing plate using the screws supplied or appropriate wall
fixings, check with a spirit level to ensure bracket is level. Tighten screws.
2. Mark the position of the decorative chimney at the ceiling and wall. Cut the cornice moulding away if required,
to enable the chimney to sit flush against the wall and ceiling.
3. Only if ducting ‐ Mark and cut out the hole in the ceiling / wall to fit the ducting (160mm dia max).
Warning: Chimney depth is 172mm. Ensure no part of the hole is greater than 170mm from the wall.
4. Use the upper chimney bracket as a template to mark the fixing screw positions. Using the screws supplied, fix
the chimney bracket to the wall, checking that it is central about the canopy.
Loading ...
Loading ...
Loading ...