Loading ...
Loading ...
Loading ...
10 49-60532-10
WOOD DRAWER FRONTS
The full extension drawer fronts on the outdoor/indoor
refrigerator are unfinished cherry wood. During use, oil
from hands may accumulate and stain the wood.
• The drawer fronts may be stained and sealed to match
adjacent cabinetry.
• Apply the stain and sealer according to the manufacturer’s
instructions. To avoid unpleasant odor, keep the door
open to ventilate and allow the stain/sealer to dry
completely before using the product.
NOTE: Natural wood may vary slightly in grain and color.
LOADING TIPS AND SUGGESTIONS
The bottom full extension drawer holds five bottles and is
loaded with necks facing the rear. Tall bottles should not
be loaded on the bottom drawer because they may prevent
the door from closing.
• Do not block the thermistor, located on the right-hand
side, just above the third shelf of the bar refrigerator with
icemaker. Blocking the thermistor could impair the air
circulation and temperature control.
Bottom drawer arrangement
CONTROLS AND FEATURES
REMOVING FULL EXTENSION DRAWERS
To remove:
1. Pull the full extension drawer out to the STOP position.
2. Push the tab on right drawer guide down while pulling
the tab on left guide up, and pull the drawer out.
To replace:
1. Push the drawer slide arm back into the unit.
2. Pull the small slide sub-assembly completely forward.
3. Insert the sides of the drawer back into the guides.
4. Push until the tabs lock into place.
NOTE: Make sure the tabs on the full extension drawer
guides are fully engaged before loading any bottles. Pull
the drawers out all the way to the STOP position and
push back in several times to make sure locking tabs are
properly engaged.
Tab (push tab down on
right drawer guide, pull tab
up on left drawer guide)
To replace, push drawer
slide arm back into unit
Pull small slide sub-assembly
completely forward
Appearance may vary
Sub-assembly
Sub-assembly
Loading ...
Loading ...
Loading ...