Loading ...
Loading ...
Loading ...
PROBLEM
Dishes not dry
Spotting and
filming
CAUSED BY
=Water is not hot
=NO HEAT DRY
option selected
,,improper loading
=Rinse agent
dispenser empty
=Hard water
,,Water is not hot
=NO HEAT DRY
option selected
• Not enough or
poor quality
detergent
,,Old detergent
,,No rinse agent
SOLUTION
oRaise water heater thermostat to 141)°F if
necessary.
• Do not select NO HEAT DRY option. Allow
dishes to dry in heated air..
=Load dishes so items drain properly. Avoid
overtoading_
°Fill rinse agent dispenser if empty.
• Fill detergent cups to capacity, Use dishwasher
detergent with highest available phosphorous
content, May be necessary to install a water
softener.
°Raise water heater thermostat to 14(
• Drying without heat may cause some
spotting. Do not select NO HEAT DRY option.
oUse more fresh automatic dishwashc
detergent. Use detergent with highe_
available phosphorous content, especially
if you have hard water.
°Use only fresh, automatic dishwashc
detergent. Store tightly closed in a coc, dry
place. Discard old, lumpy or separab
detergent. Do not fil! detergent dispenser
until ready to wash.
,Fill rinse agent dispenser.
To remove stubborn spots and film from
glassware:
1. Remove all metal utensils from th_
dishwasher°
2. Do not add detergent.
3. Select POTS PANS cycle.
4. Start the dishwasher and allow to run for
18 to 20 minutes. The dishwasher will now
be in the main wash.
5o Then open the door and pour 2 CLps
(500 ml) white vinegar into bottorr of
dishwasher.
6. Close the door and allow to compete the
cycle.
if vinegar rinse doesn't work: Repe as
above, except use 1/4 cup (60 ml) of citric
acid crystals instead of vinegar. (Mosl
drugstores carp/citric acid crystals°)
t7
Loading ...
Loading ...
Loading ...