Loading ...
Loading ...
Loading ...
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Control
Lock
m
To avoid unintended use of
your dishwasher, or cycle and
option changes during a cycle.
To turn on Lock, press and hold Heated Dry for at least
4 seconds.
To turn off Lock, press and hold Heated Dry for at least
4 seconds.
When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
controls are locked.
Anytime
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
i To start or iesume a if the do0i is opened during a CYc!e0r the power is inteirupted, the Start/Resume light Will
wash CYC!e flash to indicate suspended cycle. The cyc!e wi!! not resume until the do0r is closed and the
Start/ ........................................ Start/Resume button Spushed. ..............................................................................................
Resume
m
Cancel ]
To cancel wash cycle Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
[] To fo!low the progies s The C!ean indicator g!0ws When a Cyc!e is finished.
and status of your
.... Ifyou select the Sanitize option, when the Sani Rinse cycle is finished, the Sanitized indicator
Clean dishwasher cYCle glows. If :your dishwasher did not properly sanitize your dishes, the light flashes at the end of
the cycle. This can happe n if the cycle is interruPted, or the water could not be heated to the
required temperature. The light goes off when you open and close the door or press
Loading ...
Loading ...
Loading ...