Loading ...
Loading ...
Loading ...
Reversingthe doorswing.
STEP-BY-STEPINSTRUCTIONS(cont.)
Remove Door Assembly
2. Open the door to approxinmtely 90 degrees. Remove the 4 screws starting
flx)m the bottom to the top, Make stlre the door is supported while
removing the screws.
3. i,oosen the top screw as shown, Unhook the door b) lifting and I)ulling, as
shown b'_ the }li'i'()_vs,
4[ I,ay the door down on a soft protected fiat surface so that the inner part
thces upward (door restim, on the handle side)
2#8MachineScrews 6#10
Large
__Screws
5. Remove the 6 lar{*e_tapping screws (#10) located arotmd the perimeter
of the door outlining the gasket, and the 2 machine screws (#8) on the
hinge side.
6. _'_ith the screws removed, tm'n the door over and separate the silver cover
part of the door from the door frame and set aside.
Z Unlock the 4 tabs on the plastic cover and separate the plastic cover fl'oin
the fl'am e,
NOTE: Disregard the "DO NOT REMOVE" label on the plastic cover.
/2
Loading ...
Loading ...
Loading ...