Loading ...
Loading ...
Loading ...
Control Pad Features
Note: The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVENINTERIOR BAKE PAD
LIGHT PADUsed Used to
toturn oven selectthe
interiorlight ON bake
and OFF.\ function.
WARM & _\ Upper_
HOLDPAD \ I
Used to set _ ;_
thoel_'Varm & _
feature.
SELECT SELF-
CLEAN PAD
Used to select
the Self-Cleaning
cycle. A 2, 3 or 4
hour Self-Clean
time may be
selected.
BROIL PAD COOKTIME
Usedto PADUsedto
selectthe enterthe length temperature, cook time, starttime (when
variable broil of the baking
function, time.
/
UP and DOWN ARROWS PADS Used Oven
along with the function pads to select oven Light
0veil
LockOtlt
DELAY START PAD Used to
set the desired start time for CLOCK
baking or cleaning. May be SET PAD
used with COOK TIME to Used to set
program a delayed bake cycle, the time of
day.
STOP CLEAR PAD Used to clear any function previously
entered except the time of day and minute timer. Press
STOP CLEAR to stop cooking. Also the STOP CLEAR
pad is used to activate oven lockout setting.
Pad
programmingan automaticstarttime),time/
of day, cleantime andminutetimer.
Cook Time Pad
(some models)
Bake Broil
Pad
Select Clean/Pad
(some models) Warm &
ADD MINUTE PAD Used to add 1 Held Pad
minute to the Timer Countdown. This
(some
feature works with the Kitchen Timer only models)
and does not affect any cook time or start
time functions (some models), models)
TIMER SET/OFF PAD Used to set or cancel the minute timer. The minute
timer does not start or stop cooking. Also, TIMER SET/OFF Pad is used to
set the Continuous Bake Feature.
Stop
Clear
Pad
Delay Start
Pad (some
For a silent control panel:
The _ pad controls the Silent Control Panel feature. The Silent Control Panel feature allows the oven control to be
operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and
later returned to operating with all the normal sounds and beeps.
To change control from normal sound operation to silent control operation
1. Press and hold _ pad for 6 seconds. A beep will sound, "--:--" will appear, "UPPER" and "DELAY" will flash in the
V
display. After 6 seconds, a beep will sound and "SP" (speaker) will appear in the display.
2. Press A or v pad to switch between normal sound operation and silent operation mode. If "SP" appears, the control
will operate with normal sounds and beeps. If "- -" appears, the control is in the silent operation mode.
3. Wait 5 seconds to accept the change or press _ pad to reject the
change.
Temperature Conversion (Fahrenheit / Celsius)
The ) pad controls the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. Note: both ovens
will be changed at the same time.
To change display from Fahrenheit to Celsius or Celsius to Fahrenheit
1. Press _padandholdfor6seconds. Abeepwillsound, "---"willappear"UPPER"and"BROIL"willflashinthedisplay.
After 6 seconds a beep will be heard and "F" or "C" will appear in the display. If "F" appears, the display is set to show
temperatures in Fahrenheit. If "C" appears, the display is set to show temperatures in Celsius.
2. Press A or v pad to switch between Fahrenheit or Celsius display modes. The display will show either "F" or "C".
3. Wait 5 seconds to accept the change or press _ pad to reject the
change.
Loading ...
Loading ...
Loading ...