Loading ...
Loading ...
Loading ...
–
5
–
7. OPERATION
Important: Always ensure the fan is switched off, the
mains plug is disconnected from the power supply and
that the fan blade has stopped rotating before moving.
Before plugging in your tool, make sure the socket
voltage matches that on the product plate. If the socket
voltage does not match that shown on the type plate, it
can result in a serious hazard and damage to your tool.
7.1 3 SPEED CONTROL – FIG. 2
Push button speed selection:
0= Off, 1= Slow, 2=Medium, 3= Fast.
2
FIG.
7.2 TILTING – FIG. 3
To adjust the angle and direction, tilt the fan by gently
pushing or pulling on the top of the fan housing.
DO NOT exert excess pressure or damage to the fan
may occur.
3
FIG.
8. MAINTENANCE
8.1 MAINTENANCE
1. Before cleaning, always switch off and unplug the
fan, and allow the blades to stop rotating.
2. All plastic components should be cleaned with a
damp cloth. DO NOT spray with water/cleaning
agents or immerse the fan unit in water.
3.
Warning! Ensure that any water and/or cleaning
detergent DOES NOT enter the motor housing or
switch mechanism.
4. Ensure that the unit is clean, dry and correctly
assembled after cleaning and before every use.
9. WARRANTY
9.1 WARRANTY
Draper tools have been carefully tested and inspected
before shipment and are guaranteed to be free from
defective materials and workmanship.
Should the tool develop a fault, please return the
complete tool to your nearest distributor or contact:
Draper Tools Limited
UK: Chandler’s Ford, Eastleigh, Hampshire,
SO53 1YF. England.
EU: Oude Graff 8, 6002 NL Weert (NL).
Telephone Sales Desk: +44 (0)23 8049 4333 or:
Product Helpline +44 (0)23 8049 4344.
A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is
due to defective materials or workmanship, repairs will
be carried out free of charge. This warranty period
covering labour/parts is 12 months from the date of
purchase except where tools are hired out when the
warranty period is 90 days from the date of purchase.
This warranty does not apply to any consumable parts,
any type of battery or normal wear and tear, nor does it
cover any damage caused by misuse, careless or
unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the
authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of
warranty, repairs and carriage charges will be quoted
and made accordingly.
This warranty applies in lieu of any other warranty
expressed or implied and variations of its terms are not
authorised.
Your Draper warranty is not effective unless you can
produce upon request a dated receipt or invoice to verify
your proof of purchase within the warranty period.
Please note that this warranty is an additional benefit
and does not affect your statutory rights.
Draper Tools Limited.
10. DISPOSAL
10.1 DISPOSAL
Ensure that the machine is disposed of according to
national regulations at the end of its working life or when
Loading ...