Loading ...
Loading ...
Loading ...
amountsofsoil raisesthewatertemperatureinthefinalrinseto cycle,
approximately155°F(68°C).Theoptionaddsheatandtime
tothecycle.
®
fO "_ Pans, casseroles, etc. with Activates the PROSCRUB spray jets and provides Heavy Duty or Normal
ProScrub tough food soil. intensified water spray to the back of the lower level rack. cycle
i............................j May add heat and time to the cycle.
To sanitize your dishes and Raises the water temperature in the final rinse to Normal cycle. Heavy
glassware in accordance approximately 155°E (68°0). This high temperature rinse Duty cycle automatically
with NSF/ANSl Standard sanitizes your dishes and glassware in accordance with uses Sani Rinse. Only
184 for Residential NSF/ANSl Standard 184 for Residential Dishwashers. these sanitization cycles
Dishwashers. Certified residential dishwashers are not intended for have been designed to
license d food estab!ishments, meet the NSF/ANSI
The Sanitize or San! Rinse option adds heat and time to the requirements"
cycle.
Loads containing tough, Increases the target water temperature during the wash Heavy Duty or Normal
baked-on food. portions of the cycle, cycles
Adds heat, wash time and water to the cycle.
For best dry ng reSUlts dry Turn OFF when loads Contain plastic d nnerware that may be All CYcles except Rinse
mDerat dishes with heat. sensitive to high temperaturesl Only. Automatic with all
OLo_J i . . : i • • wash cycles unless you
........................... This option with the use of rinse aid will provide the best . . o.
drying performance. _urn !_°_:
To run your dish washer at Delays the start of a cycle up to 4 hours. All cycles, except Rinse
a later time or during off- Select a wash cycle and options. Press 4 Hour Delay. Press Only
peak hours. START/RESUME. Close the door firmly.
Control Lock To avoid unintended use of To turn on Lock press and hold Heat Dry for at least Anytime
(O............... your d shwasher, or cyc e 4 seconds
Heat ¼ .. . ¼ •
Dr ancl opt on cnanges our ng
_ Y To turn off Lock press and hold Heat Dry for at east
a CYC!e. 4 seconds.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To start or resume a If the door is opened during a cycle or the power is interrupted, the Start!Resume indicator
wash cYcle flashes, The cycle will net resume until the door is closed and Start!Resume is pressed,
To cancelwash
cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
O Washing TOfollow the Clean indicator glows when a Cycle is finished.
® Dry,og progress of your
" fyouseeCttheSan Rnseopton, whenthesan Rnsecyceisfnshed, theSantzed ndcator
O Clean d snwasner cyc e
- s_otz_d glows. If your dishwasher did not properly sanitize your dishesl the light flashes at the end of the
m
cyc_e. This can happen if the cyc_e is interrupted_ _rthe water c_u_d n_t be heated t_ the required
Loading ...
Loading ...
Loading ...