Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM
Will not start
Hard to start
Enaine.wJJl not
t_r_ rhnd the a:
CAUSE CORRECTION
1 Out of fuel. 1 Fill fuel tank.
2 Engine not "CHOKED" properly. 2 See "TO START ENGINE" in
Operation section.
3 Engine flooded. 3 Wait several minutes before
attempting to start.
4 Bad spark plug. 4 Replace spark plug.
5 Dirty air filter. 5 Clean/replace air filter.
6 Dirty fuel filter. 6 Replace fuel filter.
7 Water in fuel. 7 Empty fuel tank and carburetor,
refill tank with fresh gasoline and
replace fuel filter.
8 Loose or damaged wiring. 8 Check all wiring.
9 Carburetor out of adjustment. 9 See "To Adjust Carburetor" in
Service and Adjustments section.
10 Engine valves out of adjustment. 10 Contact a Sears or other qualified
service center.
1 Dirty air filter. 1 Clean/replace air filter.
2 Bad spark plug. 2 Replace spark plug.
3 Weak or dead battery. 3 Recharge or replace battery.
4 Dirty fuel filter. 4 Replace fuel filter.
5 Stale or dirty fuel. 5 Empty fuel tank and refill tank witL
fresh, clean gasoline.
6 Loose or damaged wiring. 6 Check all wiring.
7 Carburetor out of adjustment. 7 See "To Adjust Carburetor" in
Service and Adjustments section.
8 Engine valves out of ad ustment. 8 Contact a Sears or other qualifie
_I_ P'_ service center.
1 1 Depress clutch/brake pedal.
.sw h_meĀ°com oofor free!
2 2 Disengage attachment clutch.
J]_o : Lt/Ve_i_lJ(o_ttf_ar__.o n [i n e. 3
%t_ a_o_n%_ ' experts, 4
nab te_nance alan, for your. hame.
5-
uorrodea cheery terminals. 5
dt(o[s to help, with hgm.e projects,
Loose or aamageaw r ng. 6
__n switch. 7
Faulty solenoid or starter. 8
:e yo_ by Sears
Faulty operator presence 9
1 Weak or dead battery. 1
2 Corroded battery terminals. 2
3 Loose or damaged wiring. 3
4 Faulty solenoid or starter. 4
30
o Find this and all yo
o Get answers from o
o Get a personalized
o Find information ar
oeN
8
brolght
Engine clicks but
will not start
Recharge or replace battery.
Replace fuse.
Clean battery terminals.
Check all wiring.
Recharge or replace battery.
Clean battery terminals.
Check all wiring.
Check/replace solenoid or starter.
Loading ...
Loading ...
Loading ...