Loading ...
Loading ...
Loading ...
13
FINAL INSTALLATION
4. Remove one of the three tter plate screws (J) from
the tter plate (H) on motor assembly (G) and loosen
the other two screws. Align the screw holes of the light
pan (M) with the loosened tter plate screws (J) and
turn clockwise. Replace previously removed tter plate
screw (J), then tighten all screws.
5. Remove one of the three light pan screws (Q) from the
light pan (M) and loosen the other two screws. Connect
the 9-pin connector from the motor assembly (G) to the
light kit (I). Align the screw holes of the light kit (I) with
the loosened light pan screws (Q) andturn clockwise.
Replace previously removed light pan screw (Q).
Tighten all screws.
6. Lift the glass bowl (K) into the light kit (I) and twist the
glass bowl (K) in a clockwise direction until secure.
4
M
J
H
5
Q
I
Q
6
K
I
9-pin Connector
Loading ...
Loading ...
Loading ...