GE - General Electric GDS20KCSCBS GE bottom-mount refrigerator

User Manual - Page 4

For GDS20KCSCBS.

PDF File Manual, 132 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Aboutthe controlswith
temperaturesettings. (forother models, see next page)
NOTE: Therefrigeratoris shipped with protective film covering the temperaturecontrols.
If this film was not removedduringinstallation, remove it now
The temperature controls are preset in the factory at 37°t: for the refrigerator compartment
and O°Ffor the freezer compartment. Allow24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the SET temperature based on usage and operating environment.
Setting either or both controls to OFFstops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
Changing the Temperature
To change the temperature, press and release the
WARMER or COLDER pad. The Sk'Tlight will corn e
on and the display will show the set teml_eramre.
To change the temperature, tap either the
WARMERor COLDERpad tmfil the desired
temperature is displayed. Refl_igerator temperatures
can be ac!iusted between 34°F and 47°F and the
fl'eezer teInperatures can be ac!iusted between
-6°F and +8°E
Once the desired temperature has been set,
the temperatm'e display will return to the actual
refl-igerator and fl'eezer teinl)eratures atter 5
seconds. Several ac!jusunents ina)' be required.
Each time you ac!iust controls, allow 24 horns fiw the
refrigerator to reach the temperature you have set.
Toturn the cooling system off, tap the WARMER pad
for either the refl-igerator or the ti'eezer until the
display shows OFF. To turn the unit back on, press the
COLDERpad flw either the refl'igerator or fl'eeze_:
The SETlight will illmninate on the side y(m
selected. Then press the COLDERpad again (on the
side where the SETlight is illuminated) and it will
go to the preset points of O°Ffor the fl'eezer and
37°Ffor the refiJgerato_: Setting either or both
controls to Off stops cooling in both the ti'eezer
and refi-igerator compartments, but does not shut
off electrical power to the refl_igerator.
Performance Air Flow System
The Perfimnance _Mr How System is designed to
maximize temperatm'e control in the refl-igerator
and fl'eezer compartments. This tmique special
teatm'e consists of the _dr Tower along the back
wall of the refl_igerator and the _dr Ttmnel on the
bottom portion of the fl'eezer rear wall. Placing
ti)o(1 in fl'ont of the lou\'e_ on these components
will not affect perlbmmnce.
4
Loading ...
Loading ...
Loading ...