Loading ...
Loading ...
Loading ...
Installation Instructions
[] EXHAUST CONNECTION
,_,WARNING - TO REDUCE THE RISK
OF FIRE OR PERSONAL INJURY:
• Exhausting the dryer to the outdoors is strongly recom-
mended to prevent large amounts of moisture from
being blown into the room.
• Use only metal duct.
• Do not terminate exhaust in a chimney, any gas vent,
under an enclosed floor (crawl space), or into an attic.
The accumulated lint could create a fire hazard.
• Provide an access for inspection and cleaning of the
exhaust system, especially at turns. Inspect and clean at
least once a year.
• Never terminate the exhaust into a common duct with a
kitchen exhaust. A combination of lint and grease could
create a fire hazard.
• Do not obstruct incoming or exhausted air.
THIS DRYER COMES READY FOR REAR
EXHAUSTING. IF SPACE IS LIMITED, USE
THE INSTRUCTIONS IN SECTION 9 TO
EXHAUST DIRECTLY FROM THE SIDES OR
BOTTOM OF THE CABINET,
STANDARD REAR EXHAUST
(Vented above floor level)
ELBOWHIGHLY
RECOMMENDED
ELBOWHIGHLY
_ RECOMMENDED
RECOMMENDED
= CONFIGURATION
TO MINIMI7E
EXHAUST
BLOCKAGE.
NOTE: ELBOWS WILL PREVENT DUCT
KINKING AND COLLAPSING.
STANDARD REAR EXHAUST
(Vented at floor level)
FORSTRAIGHT
LINEINSTALLATION,
CONNECTTHE
DRYEREXHAUST
TOTHEEXTERNAL
EXHAUSTHOODUSIN(
DUCTTAPEORCLAMR
CUTTHEMETALEXHAUST
DUCT(NOTSUPPLIED)TOTHE
PROPERLENGTH.
[] LEVELING AND STABILIZING
YOUR DRYER
STANDTHEDRYERUPRIGHTNEARTHEFINALLOCATIONANDADJUST
THE4LEVELINGLEGS,ATTHECORNERS,TOENSURETHATTHEDRYER
ISLEVELFROMSIDETOSIDEANDFRONTTOREAR.
LEVEL
FRON_TO-BACK, LEVEL
SIDE-TO-SIDE,
4LEVELING
LEGS
NOTE:WESTRONGLYRECOMMENDSOLIDMETALEXHAUSTDUCTING.
HOWEVER,IFFLEXIBLEDUCTINGISUSEDITMUSTBEMETALNOTPLASTIC. 4
Loading ...
Loading ...
Loading ...