Loading ...
Loading ...
Loading ...
_.x@ttltal SOUI_5
Yournewicemakermaymakesoundsthatarenotfamiliarto
you.Becausethesoundsarenewtoyou,youmightbe
concernedaboutthem.Mostofthenewsoundsarenormal.Hard
surfacessuchasfloors,wallsandcabinetscanmakethesounds
seemlouderthantheyactuallyare.Thefollowingdescribesthe
kindsofsoundsthatmightbenewtoyouandwhatmaybe
makingthem.
• Youwillhearabuzzingsoundwhenthewatervalveopensto
fillthewaterreservoirforeachcycle.
• Rattlingnoisesmaycomefromtheflowoftherefrigerantor
thewaterline.Itemsstoredontopoftheicemakercanalso
makenoises.
• Thehigh-efficiencycompressormaymakeapulsatingorhigh
pitchedsound.
• Waterrunningovertheevaporatorplatemaymakea
splashingsound.
• Waterrunningfromtheevaporatorplatetothewaterreservoir
maymakeasplashingsound.
• Aseachcycleends,youmayhearagurglingsounddueto
therefrigerantflowinginyouricemaker.
• Youmayhearairbeingforcedoverthecondenserbythe
condenserfan.
• Duringtheharvestcycle,youmayheara"thud"whentheice
sheetslidesfromtheevaporatorontothecuttergrid.
• Whenyoufirststarttheicemaker,youmayhearwater
runningcontinuously.Theicemakerisprogrammedtoruna
rinsecyclebeforeitbeginstomakeice.
ICE MAKER USE
The Ice Making Process
1. Water is constantly circulated over a freezing plate. As the
water freezes into ice, the minerals in the water are rejected.
This produces a sheet of ice with a low mineral content.
2.
When the desired thickness is reached, the ice sheet is
released and slides onto a cutter grid. The grid divides the
sheet into individual cubes.
3. The water containing the rejected minerals is drained after
each freezing cycle.
4. Fresh water enters the machine for the next ice making cycle.
5. Cubes fall into the storage bin. When the bin is full, the ice
maker shuts off automatically and restarts when more ice is
needed. The ice bin is not refrigerated, and some melting will
occur. The amount of melting varies with room temperature.
%0;11 ICe
When you first start your ice maker, the water pan will fill and the
system will rinse itself before starting to make ice. The rinsing
process takes about 5 minutes.
Under normal operating conditions, the ice maker will cycle at
preset temperatures. The ice level sensor located in the ice
storage bin will monitor the ice levels.
IMPORTANT:
• If the water supply to the ice maker is turned off, be sure to
set the ice maker control to OFR
• The ice maker is designed to make clear ice from the majority
of water sources on a daily basis. If your results are
unsatisfactory, your water may need to be filtered or treated.
NOTE: As the room and water temperatures vary, so will the
amount of ice produced and stored. This means that higher
operating temperatures result in reduced ice production.
8
Loading ...
Loading ...
Loading ...