Loading ...
Loading ...
Loading ...
7
ENGLISH
Base Cabinet
Assembly (Fig.J)
Items Needed
• Filler Bracket (Qty: 1)
NOTE: Filler bracket
11
is used to fill the gap between the
work surface and top of the base cabinet. If you chose not to
use a worksurface the filler strip is notrequired.
Process
1. Install the leveling feet. Please refer to Assembling the
Leveling Feet under the Assemblysection.
2. Position filler bracket flush to the top front edge of the
base cabinet, inside the weldtabs.
3. Attach filler bracket with adhesivetape.
4. Please refer to Leveling Foot Adjustment under the
Operationsection.
Grommet Assembly (Fig.I)
Items Needed
• Grommet (Qty: 3)
Process
1. Place the grommet
10
in thehole.
Option 1- Mounting Cabinet (Fig.G)
NOTE: Option 1is for hanging cabinet to Trackwall only.If
hanging cabinet directly on the wall, go to Option2.
Process
1. Attach top and wall bracket as shown using (4) screw
and (4)nuts.
2. Tighten the screws with 5/32" hex key and socket
wrench. Do not overtighten.
3. Attach the wall cabinet to theTrackwall.
Option 2- Mounting Cabinet (Fig.H)
WARNING: Wall cabinet MUST be attached to two
studs in a wood frame wall. Failure to do so may cause
personal injury or product damage. Use appropriate
hardware per your local building codes. Failure to do so
may cause personal injury or productdamage.
WARNING: Use two or more people to move and
assemble cabinet. Failure to do so may cause personal
injury or productdamage.
WARNING: Cabinet must be mounted level. Failure to
do so may cause personal injury or productdamage.
Items Needed
Mounting hardware as defined by your local buildingcode.
Process
1. Align wall cabinet withstuds.
2. Mark and drill (2) 1/8” pilotholes.
NOTE: Use outside holes for mounting to studs on
24”centers.
3. Use inside set of holes for mounting to studs on
16”centers.
4. Attach wall cabinet to studs using appropriate hardware
as defined by your local buildingcode.
Wall Cabinet
Shelf Attachment (Fig.F)
Items Needed
• 1/4‑20 x 3/4” Button Head Screw (Qty: 4)
• 1/4‑20 Serrated Flange Nut (Qty: 4)
• 5/32 Hex Key
• 7/16” Socket
• Socket Wrench
Process
1. Place cabinet in its uprightposition.
2. Insert shelf from front of theunit.
3. Place the side of the shelf in the desired moutning
location in the side of the unit and rotate into position
asshown.
4. Attach using (4) screws, (4) nuts in mounting holes
asshown.
5. Tighten the screws with 5/32" hexkey.
6. Wrench tighten all screws securely. Do not overtighten.
Shelf Placement (Fig.E)
Items Needed
• 1/4‑20 x 3/4” Button Head Screw (Qty: 8)
• 5/32 Hex Key
Process
1. Insert the shelf from the front of theunit.
2. Place in desired mounting location in the back of the
unit, and rotate intoplace.
3. Attach using (2) 1/4‑20 x 3/4” button head screw
9
asshown.
4. Repeat untill all (4) shelves are inplace.
5. The second shelf from the top should be placed in the
fifth hole from the top for proper lockpositon.
6. Tighten the screws with 5/32" hexkey.
7. Wrench tighten all screws securely. Do not overtighten.
2. Mark center of mounting hole location, using slots in
bracket as atemplate.
3. Remove bracket. Drill 1/8” mountinghole.
4. Mount to unit using (1) 1/4‑20 x 3/4” button head
screw
3
, and (1) 1/4‑20 serrated flange nut
4
.
5. Tighten the screws with 5/32" hexkey.
6. Wrench tighten all screws securely. Do not overtighten.
WARNING: Cabinet MUST be attached to a stud in a
wood frame wall. Failure to do so may cause personal
injury or productdamage.
Wood frame wall, concrete or other surfaces require
hardware for mounting. Use appropriate hardware per your
local building codes. Failure to do so may cause personal
injury or productdamage.
7. Align cabinet with a stud. Adjust leveler feet
1
ifneeded.
8. Drill 1/8” pilothole.
9. Attach cabinet to stud using appropriate screw
8
.
10. Please refer to Leveling Foot Adjustment under the
Operationsection.
Loading ...
Loading ...
Loading ...