Kenmore 153336952 gas water heater

User Manual - Page 24

For 153336952.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Troubleshooting Guide (cont'd)
Operational Conditions (cont'd)
HIGH TEMPERATURE SHUT OFF SYSTEM
This water heater is equipped with an automatic gas shut offsys-
tem. The high temperature shut off is built into the gas control
valve. This system shuts off the gas supply to the water heater
burners when high water temperatures are present. It is non-
resettable. If the high temperature shut off activates, the gas con-
trol valve must be replaced. If this were to occur, turn "OFF" the
entire gas supply to the water heater. Contact the Sears Service
Center.
AWARNING J
Shouldoverheating occuror the gassupplyfail to shut off,
turn "OFF" the manual gascontro valveto the app ante,
AWARNING
Due to the nature of the typical gas water heater, the
water temperature in certain situations may be hotter
than the thermostat setting.
Short, frequent draws of hot water - especially with very
cold incoming water - can shock the thermostat into brief
operation resulting in hotter and hotter layers of water
closer to the top of the tank.
Changes in hot water usage patterns or raising the tem-
perature differential between the cut-on of the thermo-
stat and the cold water temperature will usually eliminate
the problem.
NOT ENOUGH OR NO HOT WATER
Check the manual gas shut offvalve to be sure it is open.
Check the pilot flame. It may have gone out. All models have
an opening behind the outer door for viewing the pilot.
If the pilot is not lit, follow the "Lighting" instructions in this
manual or located above the gas control valve on the water
heater to relight the pilot. If the water was extremely hot and
is now cold, the high limit safety temperature shut off may
have put our the burner and pilot. If the high temperature
shut off activates, the gas control valve must be replaced.
Contact the Sears Service Center.
[, The gas control knob must be turned to the "ON" position.
The temperature adjustment dial may be set too low, See the
"Temperature Regulation" section.
The gas company can check the gas input to see if it is correct.
i An underfired water heater nor heat water as quickly.
will
Look for leaking or open hot water faucets. Make sure all are
closed.
The cold water inlet temperature may he colder during the
winter months. It will take longer to heat the water and seem
like less hot water.
If you cannot find what is wrong, call the Sears Service
Center.
WATER IS TOO HOT
1. The temperature adjustment dial may be set too high. See the
"Temperature Adjustment" section.
NOTE: A period of time is necessary after an adjustment has
been made for the water temperature to reach the new tem-
perature setting.
2. If lower temperature settings will not lower the water tempera-
ture, call the Sears Service Center.
24
Loading ...
Loading ...
Loading ...