Loading ...
2
Tip Over Hazard
Do not use dishwasher until completely installed.
Do not push down on open door.
Doing so can result in serious injury or cuts.
WARNING
GROUNDING INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for
electric current. The dishwasher is equipped with a cord
having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet
that is installed and grounded in accordance with all local
codes and ordinances.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service representative if
you are in doubt whether the dishwasher is properly
grounded. Do not modify the plug provided with the
dishwasher; if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
■
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dishwasher.
KEY USAGE TIPS
Filtration System and Maintenance
The filter system consists of two
parts: an upper filter assembly and a
lower filter.
IMPORTANT: To avoid damage to
dishwasher, do not operate your
dishwasher without filters properly
installed. Be sure lower filter is
securely in place and upper filter
assembly is locked into place. If
upper assembly turns freely, it is not locked into place.
The filters may need to be cleaned when:
■ Visible objects or soils are on upper filter
assembly.
■ Dishes feel gritty to the touch.
See “Filtration System” in full User Guide for
complete removal and maintenance schedule.
IMPORTANT: Do not use wire brush, scouring
pad, etc., as they may damage the filters.
Rinse filter under running water until soils are
removed. If you have hard to remove soils or
calcium deposits from hard water, a soft brush
may be required.
Easy to remove third level rack
(on some models)
If additional space is needed in the
upper rack, the third level rack can
easily be removed
To remove, fully extend rack until it
stops. Then open the track stops
on each side and lift to remove.
Lower Filter
Upper Filter
Assembly
P
U
S
H
D
O
W
N
&
T
U
R
N
L
O
C
K
U
N
L
O
C
K
A.Track stop B.Track
Drying - Rinse Aid is essential.
You must use a drying agent, such
as a rinse aid, for good drying
performance. Rinse aid along with
the Heat Dry option provides the
best drying and avoids excessive
moisture in the dishwasher interior.
Energy efficiency
Energy efficiency is gained by extending cycle time and
reducing the amount of wattage and water used during
your dishwasher’s cycle. All models contain an optical
water sensor to determine water and energy consumption.
Your first cycle will run longer to calibrate the optical water
sensor.
Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves on gas.
Press start/resume every time
you add a dish.
IMPORTANT: If anyone opens the door (such as, for
adding a dish, even during the Delay Hours option),
START/RESUME must be pressed each time.
Push door firmly closed within 3 seconds of pressing
START/RESUME. If door is not closed within
3 seconds, the start button LED will flash, an audible
tone will be heard, and cycle will not start.
SLIDE
Loading ...
Loading ...
Loading ...