4. Connect ground wire on
fixture to outlet box ground
screw. Connect black wire
from fixture to black wire in
outlet box and connect the
white wire from fixture to white
wire in outlet box.
Note: Do not disconnect wires
that are already connected.
5. Tuck electrical wires into
outlet box and position fixture
over studs or nipple on
mounting bracket assembly.
Secure fixture in place with
star washer(s) and cap nut(s).
Style#1 - Screw the glass ring
flrmly into the fixture socket.
Style#2 - Install proper bulb
type and wattage. Remove the
finishing screws that are
already on your fixture.
Position glass in place and
secure with finishing screws.
Style#3 - Remove spinner nut
from the socket. Place the
glass onto the fixture socket.
Use the special tool that
comes with your fixture to
tighten the spinner nut onto
the socket to secure the glass
in place. Install the proper bulb
type and wattage.
1. Note: Refer to the mounting
bracket style that matches the
bracket that is included with your
fixture.
Style#1 (Crossbar)
Loosen “B”. Adjust stud to desired
length and lock in place with “B”.
Style#2 (Nipple)
Attach nipple to mounting bracket
and adjust until it will clear fixture
when assembled. Lock in place
using the hex nut.
Style#3 (Full Round Bracket)
Mount the mounting bracket to
outlet box using outlet box screws
(not included). Make sure the
studs or nipple on the mounting
bracket are facing out from the
outlet box.
2. Firmly attach the fixture
ground wire (bare copper) to the
mounting bracket with the ground
screw (by wrapping around the
ground screw) and then connect it
to the house supply ground wire
with a wire nut. Connect the black
wire (or wire with marking) from the
fixture to the black wire in the
electrical box and connect the
white wire from the fixture to the
white wire in the electrical box.
INSTALLATION: NOTE: Product May Not Look Exactly As Shown In Figures.
Star
Washer
Cap
Nut
T-9
11/12
CEILING/WALL
TRACK LIGHTING
Fixture
Socket
Glass
Shade
Or
Finishing
Screws
Glass
(Optional)
Spinner Nut
Fixture
Socket
Special
Tool
L
I
G
H
T
I
N
G
&
F
A
N
S
E
C
L
A
I
R
A
G
E
S
&
V
E
N
T
I
L
A
T
E
U
R
S
3. Once connections of wires
are completed, carefully tuck wires
and wire nuts into the outlet box
making sure no bare wire (on the
black and white) is visible at the
wire nuts. Install the light fixture to
the wall by aligning the hole(s) in
the fixture with the studs or nipple
on the mounting bracket. Secure
in place with cap nut(s) and star
washer (s).
4. Style#1 - Install proper bulb
type and wattage. Remove the
finishing screws that are already
on your fixture. Position glass in
place and secure with finishing
screws.
Style#2 - Remove spinner nut
from the socket. Place the glass
onto the fixture socket. Use the
special tool that comes with your
fixture to tighten the spinner nut
onto the socket to secure the
glass in place.
Style#3 - Snap “pop off” head or
glass onto fixture (push, or push
and turn (it depends on the style of
your fixture)). Install proper bulb
type and wattage (not included).
Style#4 - Install proper bulb type
and wattage (not included). Install
decorative ring.
STYLE#1
STYLE#2
STYLE#3
STYLE#4
Glass
Stud
Or
Nipple
“Pop Off”
Head Or
Glass
Fixture
Socket
SAFETY PRECAUTIONS:
1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.
2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE
HAZARDS INVOLVED.
3. FIRMLY ATTACH THE FIXTURE GROUND WIRE (BARE COPPER) TO THE MOUNTING BRACKET WITH THE
GROUND SCREW (BY WRAPPING AROUND THE GROUND SCREW) AND THEN CONNECT IT TO THE
HOUSE SUPPLY GROUND WIRE WITH A WIRE NUT.
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French) Monday through Friday 8:00 AM to 5:00 PM E.S.T.
!
“INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS”
“READ ALL INSTRUCTIONS”
“IMPORTANT SAFETY
INSTRUCTIONS”
“SAVE THESE INSTRUCTIONS”
TOOLS AND MATERIALS REQUIRED:
Wire Cutters
Pliers Wrench
Wiring supplies
as required by
the Canadian
Electrical Code
and/or the
Quebec
Electrical code
Phillips
Screwdriver
White
Black
House supply
Ground wire
Fixture
Ground wire
Fixture
STYLE#2
STYLE#3
STYLE#1
Outlet
Box
Outlet
Box Screws
(not included)
Outlet
Box Screws
(not included)
Mounting
Bracket
Nipple
Hex Nut
“B”
Outlet
box
Mounting
bracket
Fixture Head
Decorative
Ring
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800) 263-4598
