Loading ...
Loading ...
Loading ...
Removing the Doors
Getting through narrow spaces
If your refrigerator will not fit through an entrance area,
you can remove the doors. Check first by measuring the
entrance.
To reinstall the right door, reverse the above steps.
Lower Hinge Removal
To prepare for removing the doors:
1 Make sure the electrical power cord is unplugged
from the wall outlet.
2 Open the freezer drawer and remove the toe
grille (see "installation" section).
3 Remove any food from the door shelves and
close the doors.
To remove the refrigerator doors:
1 Trace lightlyaround the door's top hinges with a
pencil. This makes reinstallation easier.
Once both doors are in place, ensure they are aligned
with each other and level (please see the "Installation"
section for more details), and replace the top hinge
cover.
Front
, Rear
Top Hinge
Cover \
Removing Freezer Drawer
Hinge. Ground 1 Open freezer drawer.
Screws
• . // 2 Remove drawer screws on right and left sides
{,woscrewsooeochs "e/
Hinge /-
Leave _ Remove Hex !_,_.,-'/_ _%_-__,j_w F_emove Hex
,. _/ Head Drawer /_h_//_ _'_JF.. Head Drawer
Hi.nge/ ° Screw /_/'_ _'_-_,_--_ Screw ,
vvl[n "_ _ A_.._ _#_./__ __ Im...,_ I
| _ _ .... /I_Do Not_- o '--Remcve__l_
2 Disconnect the harness by grasping both sides of I Hlli;
the connector firmly, depress the latch, and pull __ _tHIIll Remove
• Hex Head Hex Head
apart. Remove the two screws from the top hinge. _'_ HexwHea€
• . • Drawer urawer
L ft the door off of the bottom h nge and set t Screw Screw
aside.
_ 3 Lift drawer up and out to remove.
3 Unscrew the three lower hinge screws and hinge
if necessary.
Loading ...
Loading ...
Loading ...