Loading ...
Loading ...
Loading ...
Before you call for service.., go.cam
Troubleshooting Tips
Save time and money! Review the charts on the following pages,
or visit go.com. You ma_l not need to call for service.
Problem Possible Causes What To Do
Oryer doesn't start Orgeris unplugged • Makesure the druer plug ispushedcompletelu into
the outlet.
Fuse isblownlcircuit breaker • Checkthe housefuse/circuit breaker box and replace
is tripped fuse or reset breaker.NOTE:Mostelectric dryers use
two fuses/breakers.
Dryer doesn't heat Fuse is blown/circuit breaker is • Checkthe housefuse/circuit breaker box and replace
tripped; the drger mag tumble both fusesor reset both breakers.Yourdrger mug tumble
but not heat ifonlg one fuse is blown or one breaker istripped.
Gasservice is off • Makesure gas shutoff at drger and main shutoff are
fullg open.
Noheat temperature • Selectanother heat setting.
selected
Dryer shakes or Someshaking/noise is normal. • Movedrger to an evenfloor space,or adjust levelinglegs
makes noise Drger mag be sitting unevenlg as necessarg until even.
Greasy spots on clothes Improper useof fabric softener • Followdirections on fabric softener package.
Drging dirtg items • Usegour dryer to dry only clean items. Dirty items can
with clean ones stain clean items and the dryer.
Clothes were not • Sometimesstains which cannot be seenwhen the clothes
completelg clean are wet appear after drying. Useproperwashing procedures
beforedrying.
Lint on clothes Lint filter isfull • Cleanlint screenbefore each load.
Improper sorting • Sort lint producers(likechenille)from lint collectors
(likecorduroy).
Static electricity can attract lint • Seesuggestions in this section under STATIC
Overloading • Separate largeloads into smallerones.
Paper,tissue, etc., left in pockets • Empty all pockets before laundering clothes.
Static occurs Nofabric softenerwas used • Try a fabric softener.
Bounce®FabricConditioner Dryer Sheetshave been
approved for use in all GEDryerswhen usedin accordance
with the manufacturer's instructions.
Overdrging • Try a fabric softener.
• Adjustsetting to LESSDRVor DAMPDRV.
Sgnthetics, permanent press • Try a fabric softener.
and blends can cause static
Tgpeof heat • Automatic drying times will vary according to the type
of heat used(electric,natural or LPgas),sizeof load,
types of fabrics,wetness of clothes and condition of
exhaust ducts.
Inconsistent
drying times
13
Loading ...
Loading ...
Loading ...