Loading ...
Loading ...
Loading ...
Powered Liners Installation Detail Continued:
Figure 1:
Figure one shows the included
elbow transition from 7” diameter
round to 3 1/4” x 10” rectangular.
This transition is used to return the
filtered air back to inside the
kitchen either through the canopy
face of if applicable the soffit
above. The customer must provide
the appropriate length of straight
7” round ducting that connects the
hood exhaust to the elbow
transition.
Figure 2
Figure two shows a typical air exit
terminating through the canopy
face. A customer supplied,
decorative 4” x 10” register cover
face plate should be used to finish
off the cut out opening.
Figure 3
Figure three shows a typical air exit
terminating through the soffit face
directly above the hood canopy.
Again the customer must provide
a 4” x 10” register face plate.
Re-Circulating, (Non-Vented) Series: C2000SD2-NV
For use when unable to terminate exhaust ducting to outside the structure.
NOTE: The C2000 NV Unit comes supplied with charcoal filters that will
accumulate the cooking grease and over time decrease the hoods performance.
The amount and style of cooking will dictate how often the filters should be
replaced. This type of filter is designed for replacement only. Contact
Imperial to purchase proper replacement filters. The C2000SD2-NV requires
one 50 Watt Halogen (Par 20) light that must be purchased separately.
View from rear of the canopy.
Canopy Exit
Soffit Exit
Included
Not Included
Figure 1
Figure 2
4” x 10” Cover
Face Plate
4” x 10” Cover
Face Plate
Figure 3
Loading ...
Loading ...
Loading ...