Loading ...
Loading ...
Loading ...
EN-4
EN
Blender
SBL 3271SS / SBL 3272RD
2015 11/2015
Otherwise, an injury could occur or the appliance could be
damaged.
• In the event that food is sticking to the blade assembly or the
walls of the blending jar, turn the appliance off by turning
the speed dial to position 0 (Off) and disconnect it from the
power socket. Ensure the blade assembly has stopped rotating.
Carefully remove the blending jar from the motor unit. Remove
the lid and using a plastic spatula clean the blade assembly and
the walls of the blending jar. Put the lid back on and reattach
the blending jar to the motor unit. Plug the power cord into
a power socket and continue blending.
• Do not submerge the motor unit and its power cord in water
or any other liquid, or wash these parts under running water.
• When handling the blade assembly, when taking it out of the
blending jar or grinder and when cleaning it, take special care
to avoid injury. The blades are sharp.
• Do not turn the appliance on when empty. The incorrect use of
the appliance may negatively affect its lifetime.
• Always turn off the appliance by turning the speed dial to
position 0 (Off) and disconnect it from the power socket when
not in use and when leaving it without supervision, before
assembly, disassembly, changing accessories, before cleaning or
moving it.
• Check that the motor unit is turned off, disconnected from
the power socket and that the rotating parts have come to
a complete stop before removing the blending jar or grinder
from the motor unit.
• Ensure that the power plug does not come into contact with
moisture. Do not place heavy items on the power cord. Make
sure the power cord does not hang over the edge of a table or
that it does not touch a hot surface.
• Do not disconnect the appliance from the power socket by
pulling on the power cord. This could damage the power cord
or the power socket. Disconnect the cord from the power
socket by gently pulling on the plug of the power cord.
Loading ...
Loading ...
Loading ...