Loading ...
Loading ...
Loading ...
Using
Step 1
Be sure unit is full ofwater and plugged in.
Step 2
Set the Fan selectionswitch to the desired
fan speed.
Step 3
Set Humidity Control to medium position.
NOTE: Humidifier should operate with
humidity controlon the recommended
MEDIUM setting, if itdoes not, the humidity
is at a relatively high level. Totest the unit
under this condition, turn Humidity Control
all the way to MAX and unit should begin to
operate. After unit has been tested, set
Humidity Control to MEDIUM or desired
level.
Allow 24 hours for humidifier to adjust.
If humidity level in home is sufficient, the
humidifier will only operate with Humidity
Control set on maximum.
IMPORTANT: Water damage may result if
condensation starts to form on windows
or walls. Humidity Control setting should
be lowered until condensation no longer
forms.
Your Humidifier --
Step 4
If humidifier stops running, the humidity
lever is at the normal requirements for that
setting or it is adjusting tothe home condi-
tions. The table below shows approximate
relative humidity percentages which cor-
respond to the various settings of the
Humidity Control.
Recommended
When Outdoor Indoor Relative
Temperature is: Humidity is:
-10°F 20%
0°F 25%
10°F 30%
20°F & above 35%
HUMIDgTY
Operating Tips for Best Performance
1. Position the humidifier at least 2 inches 4. Regular cleaning as instructed in the
from any watt and away from any heat "Cleaning of Humidifier" section of this
registers, manual isrecommended.
2. Do not restrict airflow from entering or 5, Replacement of the evaporative wicking
exiting the humidifier. : filter at least once per humidification
3. Use Sears recommended bacteriostat season= or more depending on water
42_14900 t0 retard bacteria growth that conditions inyour area.
rni_ycause 0d0'rsand may be harmful to ....
your 5ealth.' i..... ....
8
Loading ...
Loading ...
Loading ...