Loading ...
Loading ...
Loading ...
5
the weight of a fully loaded appliance.
To ensure optimum operation and proper ventilation,
for free-standing
installation, allow at least 4” (10 cm) of airspace at the top and on both sides
of the appliance and also 4” between the back of the appliance and the wall.
If the freezer is to be built-in
If your appliance was supplied with
, allow 3/16” clearance on both sides, 2” at the
rear and 1/16” at the top. Be sure that airflow under the appliance is not
blocked.
anti-tip brackets, be sure to install them
following the directions included with the brackets.
Electrical Connection
A 115 Volt (AC only) 60 Hz grounded electrical supply with a 15- or 20- amp
fuse or circuit breaker is required. Have the wall outlet and circuit checked by
a qualified electrician to make sure the outlet is properly grounded. When a
standard 2-prong wall outlet is encountered, it is your responsibility and
obligation to have it replaced with a properly grounded 3-prong wall outlet.
:
It is recommended that a separate circuit serving only your appliance be
provided.
Use outlets that cannot be turned off by a switch or pull chain.
DO NOT USE AN EXTENSION CORD.
Electrical Shock Hazard
• Plug into a grounded 3-prong outlet.
• Do not remove ground prong.
• Do not use an adapter.
• Do not use an extension cord.
Failure to follow these instructions can
result in fire, electrical shock or death.
Loading ...
Loading ...
Loading ...