Loading ...
Loading ...
Loading ...
Operating Instructions
OPERATING YOUR DRYER, continued
to advance the User Interface to select settings
and options. See the "Cycle Selection" section
in this guide for descriptions of each cycle.
As the Cycle Selector knob is turned, the
cycle and estimated cycle time are displayed
on the User Interface screen for 5 seconds.
Press any key to advance the User Interface
and select settings and options.
select
• If no buttons are pressed, the User Interface
screen will automatically advance after 5 sec-
onds and display the preset drying temperature,
dryness level (Auto Dry) or drying time (Time
Dry), extended tumble time, and options for the
cycle selected will be displayed. See the "Cycle
Settings Chart" in this guide for settings avail-
able for each cycle.
To change the settings, press the temp, dry-
ness level (Auto Dry) or drying time (Time Dry)
and extended tumble buttons to scroll to the
desired settings. Press the "scroll up" or "scroll
down" buttons under options to scroll through
the options menu. Press the select button to
add or delete options. The estimated cycle time
will be displayed at the top of the screens.
TEM P_ERATURE I h_
DRYING TIME or J
DRYNESS LEVEL
select
Adjustments made to a cycle will be remem-
bered and recalled each time that cycle is
selected in the future.
To return to the factory default settings, select
RESET in set prefs under the options scroll
buttons.
To customize and save up to 3 cycles in non-
custom mode plus 9 more cycles for custom us-
ers, see save as favorite and CUSTOM MODE
in the User Interface sections of this guide.
5. Start the cycle.
Close the door and press start to begin the
cycle. The dryer will not operate with the door
open. To interrupt the cycle, press pause;
press start to resume the cycle. Press cancel
to stop the cycle.
To change the cycle once the cycle has begun,
press cancel, select a new cycle, and restart the
dryer.
To change the temperature, dryness level or
drying time, extended tumble time or options
once the cycle has begun, press pause, make
the new selections and restart dryer.
A signal will sound at the end of the cycle, pe-
riodically during extended tumble and wrinkle
release, when the damp alert option is select-
ed and to notify you that the load has finished.
When the cycle ends, corRPLETE will be
displayed and the drum light will come on.
Remove the items promptly and hang or fold.
Loading ...
Loading ...
Loading ...