Loading ...
Loading ...
Loading ...
4
s
afeTy
Important Safety Information
• Topreventinjurytoyouordamagetotheunit,
the appliance should be unpacked and set up by
two people.
• Iftheapplianceisdamagedondelivery,contact
the supplier immediately before connecting it to
the power source.
• Toguaranteesafeoperation,ensurethatthe
appliance is set up and connected as described
in this manual.
• Disconnecttheappliancefromthepowersource
if a fault occurs. Pull out the plug, turn off or dis-
able the power source.
• Whendisconnectingtheappliance,alwayspullit
out by the plug; never pull on the cable.
• Anyrepairsandworkontheapplianceshould
only be performed by the customer service
department. Unauthorized work may be danger-
ous to the user. The power source cable should
only be changed or replaced by the customer
service department.
• Donotstoreexplosivesorspraysusingcom-
bustible propellants such as butane, propane,
pentane, etc. in the appliance. Electrical compo-
nents might cause leaking gas to ignite. You can
identify such sprays by the printed contents or a
flame symbol.
• Topreventpossibleinjuryduetoanelectrical
shock, be sure to disconnect the power cord or
turn off the circuit breaker before cleaning the
appliance.
• Toavoidinjuryordamagetotheappliance,do
not use steam cleaning equipment to clean the
appliance.
• Donotoperatetheapplianceinthepresenceof
explosive fumes.
• Intheeventofapoweroutage,openthedoor
as infrequently as possible.
• Toprotecttheappliancefrompossibledamage,
allow it to stand 1/2 to 1 hour in place before
turning on the electricity. This allows the refriger-
ant and system lubrication to reach equilibrium.
Electrical Safety
Connect this appliance to a 15 amp or 20 amp, 110-
120 VAC, circuit which is grounded and protected by a
circuit breaker or fuse.
We recommend using a dedicated circuit for this appli-
ance to prevent circuit overload and the chance of
interruption to the appliance.
This appliance is equipped with a three-prong (ground-
ing) polarized plug for your protection against possible
shock hazards.
Where a two-prong wall receptacle is encountered,
contact a qualified electrician and have it replaced with
a properly grounded three-prong receptacle in accor-
dance with all local codes and ordinances.
WARNING!
Electrocution hazard.
Electricalgroundingrequired.
•
Do not remove the round grounding
prong from the plug.
•
Do not use extension cords or
ungrounded (two-prong) adapters.
• Donotuseapowercordthatisfrayedor
damaged.
•
Do not use a power strip.
Failure to follow these instructions may
result in fire, electrical shock or death.
Loading ...
Loading ...
Loading ...