Loading ...
Loading ...
CONTROL PANEL
A control panel on the top of the unit and a display screen on the front of the unit.
TOP CONTROL PANEL
FRONT DISPLAY SCREEN
Displays the current air quality status based on the Air Info mode
selected on the top control panel.
TOP CONTROL PANEL BUTTONS
MAX
On/O: Press to turn the power on or o.
MAX
Auto Mode: Press to turn on Auto Mode. In this setting the
fan speed automatically adjusts based on real time air quality
readings. As the air quality improves, the fan speed will
decrease. If air quality worsens, the fan speed will increase.
Leave your unit in Auto Mode for optimal filter life
and performance.
MAX
Fan Speed: Adjusts the speed of the fan. Select one of 4 settings:
1 Low, 2 Medium, 3 High, 4 Maximum. Note: If fan speed is
manually changed, auto mode will be deactivated. For tips on
optimal fan setting, see Optimizing Fan Speed section.
Air Info: Press to switch between air quality display options.
See the Air Info Settings section for more information.
MAX
Brightness: Adjusts the brightness of both the front display
screen and the top control panel. Switch between 3 options:
full brightness, partially dim, fully dim.
MAX
Shut-O Timer: Set the number of hours for the air purifier to
run before it automatically shuts o. Timer can be set between
1–12 hours.
Filter Life: Press to show the remaining filter life. Once the filter
has 0% remaining, the FILTER LIFE button will flash to indicate
the filter needs to be changed. See Installing and Removing the
Filter section for more information.
Child Lock: Hold for two seconds to lock the top control panel
buttons. To unlock, hold for two seconds again.
Tips and Tricks:
Optimize Performance in Eco Mode: After 100% clean air
status is achieved for 10 minutes in Auto Mode, your air purifier
will enter Eco Mode. Your unit’s filter life will be optimized!
Control Your Air Purifiers Beeping: Hold the Air Info
and Child Lock buttons at the same time for two seconds.
AIR INFO SETTINGS
The built-in sensor detects your air quality to give you real-time information. Use the AIR INFO button to switch between air quality
display options.
INFO
FRONT DISPLAY
SCREEN
REAL-TIME READING
% CLEAN AIR
Displays the air quality rating:
• Poor: 0%–69%• Fair: 70%–84%• Good: 85%–100%
% CLEAN AIR uses particulate matter (PM) Air Quality Standards as
determined by the EPA to calculate the air quality rating.
TIME TO CLEAN AIR
MAX
Shows the estimated time remaining until your air is clean.
PARTICLE SIZES
The PM (particulate matter) value is the amount of particulate in your
air, measured in micrograms (g) per cubic meter. Your air purifier
measures three particle sizes, PM1, PM2.5, and PM10.
PM1
MAX
Displays the amount of PM1-sized particles in your air, including viruses and ultra-fine allergens.
PM2.5
MAX
Displays the amount of PM2.5-sized particles in your air, including smoke and bacteria.
PM10
MAX
Displays the amount of PM10-sized particles in your air, including dust, mold, and pollen.
Loading ...
Loading ...
Loading ...