Loading ...
Loading ...
Loading ...
4
• DO NOT operate the appliance if damaged, malfunctioning, partially disassembled, or if it
has missing or broken parts.
• Also follow the safety instructions of the use and care guide.
• To reduce the risk of electric shock, fire, or injury to persons, the installer must ensure that the
dishwasher is completely enclosed at the time of installation.
• Only connect the dishwasher to the power supply when all installation and plumbing work is
complete.
• If the dishwasher is installed in a location that experiences freezing temperatures (e.g. in a
vacation home, cabin, etc.), you must drain all the water from the dishwasher’s interior. Water
system ruptures that occur as a result of freezing are not covered by warranty.
• Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do
this may cause damage to property or bodily injury.
• Connect to a properly rated, protected, and sized power supply circuit to avoid electrical
overload. The dishwasher is designed for an electrical supply of 120V (volts), 60Hz (hertz),
AC, connected to a dishwasher-dedicated, properly grounded electrical circuit with a fuse or
breakers rated for 15 amperes. Electrical supply conductors shall be a minimum of #16 AWG
copper wire rated at 167°F (75°C) or higher. These requirements must be met to prevent
injury and machine damage. Consult a qualified electrician if in doubt.
• DO NOT use any extension cord or portable outlet device to connect the dishwasher to a
power supply.
• Ensure that any plastic wrappings, bags, small pieces, etc., are disposed of safely and kept
out of the reach of children. Danger of suffocation!
• Remove the dishwasher door when removing an old dishwasher from service or discarding it.
Ensure that the appliance presents no danger to children while being stored for disposal.
• Old appliances may contain materials that can be recycled. Please contact your local
recycling authority about the possibility of recycling these materials.
NOTICE
• The dishwasher drain hose must be installed with a drain loop at least 28” (710mm) off the
cabinet floor; otherwise the dishwasher may not drain properly.
• This dishwasher is intended for residential use only and should not be used in commercial
establishments.
• New Installation: If the dishwasher is a new installation, most of the work must be done
before the dishwasher is moved into place.
• Replacement: If the dishwasher is replacing another dishwasher, check the existing
dishwasher connections for compatibility with the new dishwasher, and replace parts as
necessary.
• Inspect the Dishwasher: After unpacking the dishwasher and prior to installation, thoroughly
inspect the dishwasher for possible freight or cosmetic damage. Report any damage
immediately.
To contact us, you may either call our toll-free number at 1-888-845-4641 or contact us via the
website in the US (www.vikingrange.com) or in Canada (www.brigade.ca).
IMPORTANT– Please Read and Follow
Loading ...
Loading ...
Loading ...