Loading ...
Loading ...
Loading ...
r
STEP (5):
AA(6)
DD(6)
EE(6)
Note: shelf (D) from step (4) must be installed in bottom middle
location to allow door to latch and lock. Top and bottom shelves
should have slots facing toward back of unit. Install top shelf first.
• Insert shelf (D) from bottom of unit.
• Place in desired mounting location in back of unit, and rotate
into place as shown.
• Attach using (2) (AA), (2) (DD), and (2) (EE) in square
mounting holes as shown.
• Repeat until all (3) shelves are in place.
• Finger tighten.
Notch
in front AA
DD
EE
bottom
Note: Shelves may be organized in several different
configurations. Below is the recommended initial shelf spacing.
Top and bottom shelf spacing may be adjusted as necessary.
Top
i '
Bottom
...... i ;
/
/
/
From step (4)
Lowermiddle
J
mounting position
f
STEP (6):
AA(4)
BB(8)
DD(4)
EE(12)
• Insert bottom (G) into lower end of assembly and attach using
(4) (AA), (8) (BB), (4) (DD), and (12) (EE).
• Finger tighten.
/
Q
AA
DD
Insquare
Use
holes
with AA .. /
BB.......... _ EE
,J
Loading ...
Loading ...
Loading ...