Loading ...
Loading ...
Loading ...
BEVERAGE COOLER INSTALLATION
• Remove the exterior and interior packaging before use.
• Check to be sure you have all of the parts and 1 owner’s manual.
• Place your beverage cooler on a flat, dry surface that is strong enough to support the unit when fully
loaded.
• This unit is designed for free standing installation only.
• Do not place heavy objects on top of the unit.
• Unit is not designed for installation in a garage, basement, or any other location where a controlled
ambient environment between 60° and 90°F cannot be maintained.
• Do not place the unit in direct sunlight or near sources of heat. Extreme hot and cold ambient
temperatures may cause the unit not to perform properly or increase electrical consumption.
• Do not place the unit next to a major appliance that emits large amounts of heat, such as a dishwasher,
microwave, oven, etc.
• Do not plug unit into the same outlet as a refrigerator or microwave.
• Before connecting the appliance to the power source, let it stand upright for approximately 24 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth before first use.
• IMPORTANT: To function correctly, beverage cooler needs a minimum of 1 inch clearance on each side
and 4 inches clearance at the back side. Do not place underneath a table, counter top, or anything of the
sort as this will not allow for proper air circulation.
OPERATING INSTRUCTIONS
1. Gently place/slide the racks into the beverage cooler.
2. Determine the best temperature setting to use.
3. Place beverage containers inside the cooler.
4. Plug the power cord into a standard grounded electrical outlet.
5. Limit the frequency of opening the door to conserve energy and maintain proper storage temperature.
6. You can turn the interior light on and off by touching the button labeled with a light on the control panel.
Important: When using the beverage cooler for the first time, allow at least 24 hours for the internal
temperature to adjust properly. Make sure there are at least 3 to 5 beverage containers in the unit.
TEMPERATURE CONTROL
Your beverage cooler has a touch screen control panel located on the upper part of the glass door.
Setting the temperature:
You can manually adjust the temperature. Simply press the down arrow button on the control panel to
decrease the temperature and the up arrow button to increase the temperature by 1 degree increments
inside the beverage cooler. The temperature range for this unit is from 34°F (1°C) to 43°F (6°C).
To switch the temperate display from showing Celsius and Fahrenheit, press the C/F button.
7
17621 South Susana Road, Rancho Dominguez, California 90221
info@vinotemp.com
Loading ...
Loading ...
Loading ...