Loading ...
Loading ...
Loading ...
ICE AND WATER DISPENSER FEATURES
The ice and water dispenser conveniently dispenses chilled water, and ice cubes or crushed ice, depending on the model.
To operate the ice dispenser, select the ice option desired using the touchpad. Press a glass against the dispensing paddle
as far up as possible to catch all ice. To stop dispensing ice, pull glass away from dispensing paddle. Do not remove the
glass until the ice has completely dispensed. (Complete instructions for the dispenser operation are attached to the inside
of the freezer door.)
The ice maker produces 4 to 6 pounds of ice every 24 hours depending on usage conditions, ice is produced at a rate of 8
cubes every 75 to 90 minutes.
How the Water Dispenser Works
The water tank, located behind the drawers in the refrigerator compartment, automatically fills as water is dispensed. For
proper dispenser operation, the recommended supply water pressure should fall between 80 psi and 100 psi.
Water pressure must not exceed !00 Ibs, Excessive pressure may cause water filter to malfunction,
After the refrigerator is connected to the water supply, fill the water tank by drawing one glass of water, it may take about
11/2minutes after activating the dispenser paddle before water begins to fill this first glass. Continue flushing the system
for 8 minutes to rid the tank and plumbing connections of any impurities. The water dispenser has a built in shutoff device
that will stop the water flow after 8 minutes of continuous use. Simply release the dispenser paddle to reset the shutoff
mechanism.
Chemica!s from a malfunctioning Softener can damage the ice maker, ifthe ice maker isConnected
to soft water, ensure that the softener is maintained and working properly.
How the Ice Dispenser Works
The ice maker and container are located in the top of the freezer compartment. After the
refrigerator is installed properly and has cooled for several hours, the ice maker can begin
making ice within 24 hours. Air in new plumbing lines may cause the ice maker to cycle two
or three times before making a full tray of ice. ice production is controlled by the ice maker's
On/Off power switch. To gain access to the ice maker, pull ice cream tray out. Press the
switch to the "O"'position to turn it Off and press it to the '1" position to turn it On. With no
usage itwiii take approximately 2 days to fiii the ice container. The ice maker also has a built=
in wire signal arm,which automatically stops ice production when the ice bin is full. This
signal arm should not be used to manually stop the ice maker.
Because of new plumbing connections, the first production of ice cubes may be discolored or
have an odd flavor. These should be discarded until the cubes made are free of discoloration
iCE DISPENSER TIPS and taste,
• be cubes stored too Uongmay devebp an odd flavor, Empty the ice container and ensure that the ice maker's On/Off
power switch is turned On (set to the '1" position), The ice maker wHUthen produce more ice.
o Occasionally shake the ice container to keep ice separated,
o Keep the ice maker's On/Off power switch turned Off (set to the "0" position) until the refrigerator is connected to the water
supply or whenever the water supply is turned off.
IMPORTANT: The ice maker is turned ©nat the factory so it can work as soon as you insta!! you[ refrigerator, !f you
cannot connect a water supply, turn the On/Off switch tOthe Off ('!0'!) position. Otherwise, the ice maker's valve
may be noisy when it attempts to operate without water.
the disport!!rig paddle !S pushed for mote than 4 minutes, the dispenser mote[ may, eve[lead
and stop.The overload protector will reset automatically after 3 or 4 minutes.
14
Loading ...
Loading ...
Loading ...