1. Thread two screws downward to the mounting plate,
and then secure with two lock nuts.(You can adjust
the length of the screw if necessary.)
2. Attach the mounting plate to the ceiling box
by using two mounting screws.
3. Make wire connections with wire nuts:
---Connect the black wire from fixture to the
black wire from power source.
---Connect the white wire from fixture to the
white wire from power source.
---Attach the fixture grounding wire to the
mounting plate with the green grounding
screw. Then connect it to the house
grounding wire with the wire nut.
Carefully tuck wires back into the ceiling box.
4. Attach the canopy to the mounting plate, and
secure with the bolt nuts.
5. Install bulbs. (Please do not exceed the
maximum capacity that is recommended
on the package.)
6. Attach the glass shade upward to the fixture
carefully, and then secure with the rubber pad
and hex nut.
7. Attach the antler upward to the glass shade,
and then secure with the hex nut and finial.
8.Turn on the power at fuse or circuit box.
NOTE:
Be
fo
re
in
st
a
lli
n
g
,
c
on
s
ul
t
loca
l
e
le
c
tri
ca
l
c
od
e
s
fo
r wirin
g
a
n
d
g
r
ound
in
g
re
q
ui
re
m
e
nts.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
CF33016
Installation Steps
Glass Shade
Finial
Hex Nut
Hex Nut
Rubber Pad
Nipple
Cap
Fixture
Antler
Canopy
Bolt Nut
050706
Lock Nut
Fixture wire
Ceiling Box
Wire Nut
Screw
Mounting Plate
House Grounding Wire
Fixture Grounding Wire
Green Grounding Screw
Mounting Screw
