Loading ...
Loading ...
Loading ...
19
MOVING NOZZLES FROM TOP TO FRONT
6. Place the nozzle adapter on the front side of
the unit. The wide o set (30 mm) should be
faced downward. Secure the adapter with
the six (6) countersunk screws, which were
removed in procedure 4.
Tightening torque is 1.0 N・m.
CAUTION
Do not install the nozzle adapter in the wrong direction. This may cause poor cooling
performance.
Coun
tersunk screw (6)
7. A ach the nozzles to the adapter.
(See page 12)
Nozzle Adapter
Wide oset
Narrow oset
Wide oset
(
30 mm
)
Narrow oset (10 mm)
Nozzle Adapter
Loading ...
Loading ...
Loading ...