Loading ...
Loading ...
Loading ...
Divided tines
The row of tines on the right side of the top rack can be adjusted
to make room for a variety of dishes.
The bottom rack is designed for plates, pans, casseroles, and
utensils. Many items, up to 13 in. (33 era), tail fit in the bottom
rack. (See recommended loading patterns shown.)
NOTE: The features on your dishwasher rack may vary from the
drawings shown.
To adjust the front half
1. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the tine holder.
3. Move the tines to the left to make room for larger dishes.
Move the tines to the right to wedge plastic or other
lightweight items against the side of the rack.
To adjust the back half
f. Grasp the tip of the tine that is in the tine holder.
2. Gently push the tine out of the holder.
3. Lay the tines down, toward the center of the rack.
No-flip clips
The no-flip clips hold lightweight plastic items like cups, lids, or
bowls in place during washing.
10 place setting
Do not load glasses, cups, or lightweight plastic items in the
bottom rack. Load small items in the bottom rack only if they
are secured in place.
Load plates, soup bowls, etc., between tines.
Overlap the edges of plates for large loads.
Load soup, cereal, and serving bowls in the rack in a variety
of ways depending upon their size and shape. Load bowls
securely between the rows of tines. Do not nest bowls
because the spray will not reach all surfaces.
To move a clip
1. Pull the clip up and off the tine.
2. Reposition the clip on another tine.
12 place setting
Load cookie sheets, cake pans, and other large items at the
sides and back. Loading such items in front can keep the
water spray from reaching the detergent dispenser.
Secure heavily soiled cookware face down in the rack.
Make sure pot handles and other items do not stop rotation
of the spray arm(s). The spray arm(s) must move freely.
Do not load items between the bottom rack and the side of
the dishwasher tub because they might block the water inlet
opening.
NOTE: If you have removed the bottom rack for unloading or
cleaning, replace it with the bumpers in front.
lO
Loading ...
Loading ...
Loading ...