Loading ...
Loading ...
Loading ...
16
Note:
– The air conditioner should be placed on a firm, level
surface capable of supporting its weight.
– Make sure to keep at least 30 cm of free space
around the air conditioner.
– The wheels are fitted to facilitate movement over
flat surfaces. Never try to roll the air conditioner over
uneven or soft surfaces.
– If the air conditioner should be shut o inadvertently
e.g. by a power cut, it will restart automatically with
the same settings it had before the power cut when
the power comes back on.
– The remote control has an 8-metre range. Point the
remote directly at the air conditioner making sure
that there is no furniture or other objects obstructing
the signals from reaching the air conditioner.
– The signals from the remote can be blocked if the
IR sensor on the air conditioner is exposed to strong
sunlight.
– Do not expose the remote control to strong sunlight,
impacts, shocks or wetting
– Before switching the unit on for the first time, make
sure you have properly installed the exhaust hose
and inserted batteries into the remote control.
– Plug the portable air conditioner into a properly
earthed 220~240V AC 50Hz mains socket and switch
on power to the outlet.
Note: Do not connect it to a multiple socket outlet that
is also being used for other electrical appliances.
Do not connect it to an extension cord.
CHANGING THE UNITS OF TEMPERATURE, °C OR °F
Using your Remote control, hold in [ ▲TEMP▼ ] to
switch between units.
USING THE MAIN UNIT
Hold in [ + ] and [ - ] simultaneously to switch
between units.
THE COOL, DRY AND FAN MODES
– The Cool, Dry and Fan modes can be controlled both
from the main unit and using the remote control.
The instructions below explain how the modes are
controlled from the main unit. In some of the modes,
the fan speed can only be set using the remote
control (see below).
– If you wish to use the remote control: Press [ MODE ]
on the remote control and set the temperature with
[ ▲TEMP▼ ].
AIR CONDITIONER MODE COOL
1. Switch the air conditioner on.
2. Press [ MODE ] until the “COOL” indicator lights up.
3. Press [ + ]/[ - ] to set the desired temperature,
17–30ºC (62–86ºF). The display shows the set
temperature.
4. Press the “FAN SPEED” button to choose the fan
speed.
DEHUMIDIFIER MODE DRY
– Press [ MODE ] until the “Dry” indicator lights up.
Note: The temperature and fan speed cannot be set
when the dehumidifier mode is activated. The fan
motor operates at LOW speed.
– Keep windows and doors closed for best results.
– Do not put the duct to window.
AUTO MODE
When you set the air conditioner in AUTO mode, it
will automatically select cooling or fan only operation
depending on what temperature you have selected and
the room temperature. Under AUTO mode, fan speed
cannot be set.
FAN MODE
1. Press [ MODE ] until the “Fan” indicator lights up.
2. Press the “FAN SPEED” button to choose the fan
speed.
Note: The temperature cannot be set when the fan mode
is activated. Do not put the duct to window.
TIMER OPERATION
– When the unit is on, press Timer button to initiate
Auto-o stop program: TIMER OFF indicator will
illuminate. Press Up (+) or Down (-) to select time.
Press the TIMER button again within 5 seconds to
initiate the Auto-on start program: the TIMER ON
indicator will illuminate. Press Up (+) or Down (-) to
select Auto-on start time.
– When the unit is o, press the Timer button to
initiate Auto-on start program. Press it again within
five seconds to initiate the Auto-o stop program.
– Press or hold Up (+) or Down (-) to set the Auto time
by 0.5 hour increments up to 10 hours, then at 1 hour
increments up to 24 hours. The remaining time will
be displayed.
– Turning the unit ON or OFF, adjusting the timer
setting to 0.0 or any instance of malfunction will
cancel the Auto Start/Stop timer program.
Operation Instructions
Loading ...
Loading ...
Loading ...